Direct sales 500kg fish bait feed mixer chicken feed mixer mixer

Direct selling kilogram fish bait feed mixer chicken feed mixer mixing machine
H
Series feed mixing mixer
One
Features
The feed mixer series has vertical
type , suitable for feed processing by professional feed processing households and large, medium and small farms. This machine has advanced design, reasonable structure, reliable performance, easy maintenance, high production efficiency, small space occupation, labor and time saving, less dust and good sealing performance. It is the first choice and best product for the majority of breeding professionals to develop the economy and become rich.
Two
Structure and working principle of feed mixer equipment
The shell of Hengtong brand feed crushing mixer is welded with high-quality materials. The feed port is at the top of the crusher and can be used with various forms of feed. When the feed mixer is working, the material enters the crushing chamber. Under the action of the high-speed rotating hammer and the friction of the sieve plate, the material is gradually crushed, and under the action of centrifugal force and air flow, the material passes through the bottom and exits. Discharge from the material port.
Three
Feed crushing and mixing combination machine equipment usage and safety precautions
In order to avoid accidents during transportation, loading and unloading of the machine, you must check whether the bolts and nuts of each part are loose and flat before use. Check whether the teeth, scallops, and spindle nut are loose. Turn the pulley by hand to check whether there is any collision on the machine.
Whether the machine rotates flexibly, whether there are any debris in the machine, and it can be started after idling for several minutes
if there are no abnormal phenomena.
When working, be sure to remove debris from the materials. It is strictly forbidden to allow iron, stones and other objects to enter the machine to avoid damage to the machine and injury to people.
The material collecting bag should be
more than 1 meter long and
diameter.
M, the fabric should not be too dense, and the material should be discharged in time during use to ensure that the bag has sufficient breathability.
Feeding should be even and pay attention to the power load to avoid choking. When crushing particulate matter, the pumping plate regulator can be used to adjust the feeding amount.
Hammer type: When the wear of one corner affects the work efficiency, the hammer blades can be turned around from the opposite side (when turning around, the group
is adjusted together to avoid causing imbalance in the rotor). All hammer blades should be replaced.
Gutter should be added before starting the machine every day, and the condition of the bearings should be checked after hours of use. When installing the screen, the burr side should be installed on it. According to the fineness of the crushed materials, screen meshes with different diameters are selected.
Four
Main technical parameters
Coefficient of variation of uniform mixing＞=%
Noise in the working area of the unit＞=ｄｂ
Dust in the working area of the unit＞=m/
Finished product type dry powder mixed feed
Operators