Wuhu City's new corn straw harvester and reed collector are the first choice for buyers

型号：

wt-100

外形尺寸：

1250*1150*3150

重量：

380kg

At present, when preparing corn silage in agricultural areas in my country, most of the techniques used to harvest corn are based on segmented harvesting, that is, after the corn plants are cut down manually, they are transported to the silage facility using animal power or other transportation machinery, and then they are harvested by sections. It is manually transported to the mower, processed and chopped, and then loaded into the silage facility for silage. The main feature of this harvesting process is that the entire operation is completed in several stages and is mainly operated manually. The labor intensity is high, the production efficiency is low, and the silage process generally requires ~. The combined harvesting process uses a dedicated green fodder harvester to complete operations such as cutting, transporting, chopping and loading the chopped materials into the feed trailer in the field at one time. The trailer loads the feed into the silage facility, and after compaction and sealing, the entire corn silage process is completed. Compared with the staged harvesting process. The combined harvesting process has outstanding advantages. First, the production efficiency is greatly improved. Second, the operating cost is greatly reduced.
Choose the right harvesting machine
At present, there are many types of green fodder harvesters produced at home and abroad. According to the way it is connected with power equipment, it can be divided into traction type, suspended type and self-propelled type. According to the production capacity of the machine, it can be divided into low productivity models. The supporting power power is left and right medium productivity models, and the supporting power power is ~ High productivity models generally have power above. When choosing a corn harvester, you must consider factors such as the amount of silage produced, the requirements for silage quality, the number and power of existing supporting machines, and the climatic conditions during the silage harvest period. At present, there are at least three models of corn and green fodder harvesters available in China. In terms of silage technical requirements. In order to ensure the quality of green fodder and reduce the loss of nutrients, the silage process should be shortened as much as possible, so it is more reasonable to choose a high-productivity model. According to my country's current rural economic and technical conditions, it is appropriate to use a silage harvester with medium productivity of ~~ to prepare corn silage. Such as domestically produced and different models. This type of machine is powered by Tieniu tractor, adopts side and rear suspension, and comes with its own feed trailer. It can not only harvest the whole corn plant (or stems and leaves) in the field, but can also be used as a fixed working machine in the farmland or near silage facilities to process corn, sorghum, sunflower and other crop straws. The shredding quality can meet the requirements of livestock feeding. Require. The production efficiency is high and it is a high-efficiency and low-consumption operating machine
Processing of silage raw materials
The raw materials should be crushed and cut into short pieces before silage. The purpose is to ① facilitate compaction and remove the air in the middle of the material ② increase the contact area between the inoculant and the material, which is conducive to the rapid reproduction of bacteria ③ make the juice in the raw material fully seep out and moisten the surface of the raw material, which is beneficial to the microorganisms in the starter Grow rapidly and improve the quality of silage. The degree of shredding of raw materials should be determined according to the type of livestock fed and the quality of the raw materials. Generally speaking, green raw materials with a high water content can be cut into longer pieces, fodder for feeding large livestock can be cut into longer pieces, and raw materials with a low water content and a hard texture can be cut into finer pieces or beaten into fine powder. Generally, the cutting length of storage materials is ~.
Filling of silage raw materials
The principle of filling silage materials is that it must be rapid. Silage bins are to be filled on the same day. Seal the cellar on the same day to prevent the silage from deteriorating before it is filled and sealed. Even large-scale silage must be filled within it. At present, many farmers generally build large ponds, which cannot be filled and sealed on the same day, and are even exposed to the air for several days, which will cause the raw materials to become moldy and deteriorate, and reduce the quality of the silage. Second, compaction is required. The more compact the silage is, the better, and large pits are compacted mechanically. Places that cannot be pressed must be stepped down manually. Packing silage in plastic bags should avoid damage to the plastic bags.
Different raw materials, different environmental conditions, different nutrient composition ratios, and different maturation times of silage. Generally speaking. Raw materials with a high sugar content that are easy to silage should be siled for a shorter time, while raw materials with a hard texture that are not easy to silage should be siled for a longer time, usually ranging from 1 to 3 months.