Zhengzhengruo Feed Pellet Machine|Multifunctional Pellet Machine Sales Quotation

型号：

wt-120A

产量：

60-80kg/H

功率：

2.2KW

This machine is suitable for pressing dried and crushed corn, sorghum, bean straw and other straw into pellet feed with a certain density.
In addition to the original nutrition of straw, straw pellet feed also has a paste aroma produced by heating during the pressing process. It is called compressed biscuit material for cattle and sheep.
>This machine is a mechanically driven plunger-type hot press forming machine. Because there are three cranks on the main shaft, it can drive three plungers to move at the same time, so it is called a three-piston straw pellet feed forming machine.
>The main body of the machine is composed of three parts: the power and transmission device, which provides the power required by the machine and achieves deceleration. Power is provided by a three-phase AC motor, and the transmission device adopts belt drive. The compression molding device consists of a crank plunger mechanism, a material mold and other components. Through the rotation of the main shaft, the three plungers take turns to press the straw raw material into the material mold and form it. During the straw feed forming process, an electric heating coil is needed to properly heat the straw raw material to soften the lignin in the straw. Under the huge pressure of the plunger, the straw raw material forms pellet feed with a certain density through the bonding effect of softened lignin, and is continuously extruded. The function of three groups of linked screw feeders is to continuously supply straw raw materials to the material mold. After deceleration, the motor drives three sets of screws simultaneously through chain transmission and gear transmission to complete feeding