Hebei factory direct sales corn straw recycling machine

型号：

wt-100

外形尺寸：

1250*1750*3150

重量：

380kg

Raw materials should be crushed and cut into pieces before silage. The purpose is to ① facilitate compaction and remove the air in the middle of the material ② increase the contact area between the inoculant and the material, which is conducive to the rapid reproduction of bacteria ③ make the juice in the raw material fully seep out and moisten the surface of the raw material, which is beneficial to the microorganisms in the starter Grow rapidly and improve the quality of silage. The degree of shredding of raw materials should be determined according to the type of livestock fed and the quality of the raw materials. Generally speaking, green raw materials with a high water content can be cut into longer pieces, fodder for feeding large livestock can be cut into longer pieces, and raw materials with a low water content and a hard texture can be cut into finer pieces or beaten into fine powder. Generally, the cutting length of storage materials is ~. Different raw materials, different environmental conditions, different nutrient composition ratios, and different maturation times of silage. Generally speaking. Raw materials with a high sugar content that are easy to silage should be siled for a shorter time, while raw materials with a hard texture that are not easy to silage should be siled for a longer time, usually ranging from 1 to 3 months.
2. The key to success in making silage
The feed must have a certain moisture content. Generally, the moisture content of raw materials for making silage should be maintained at a certain level. If it is lower than or higher than this moisture content, it will not be easy to silage. If the moisture content is high, add bran to absorb water; if the moisture content is low, add water.
The ingredients must have a certain sugar content. Generally, it is required that the sugar content of raw materials should not be less than 1.
The storage process should be fast. The most effective way to shorten the silage time is to do it quickly. Generally, the silage process in small farms should be completed within days. This requires quick collection, quick transportation, quick cutting, quick loading, quick stepping, and quick sealing.
Real. When loading the cellar, the silage material must be compacted and the air in the material must be discharged as much as possible. Do not ignore the corners and create an anaerobic environment as much as possible.
Seal. The silage container must not leak water or air. Be sure to pay attention to the maintenance work the day after tomorrow.
Silage can be made successfully as long as you master the water, sugar, speed, solidity and density.
What aspects should be paid attention to when feeding silage to livestock?
When taking silage from a rectangular silage pit, you should gradually take it from one end. Do not make holes and dig out the core to avoid long-term exposure of the surface and affect the quality of the silage. Once the silage cellar is opened, it must be used continuously every day without interruption, so that the silage can be fed before the mold can fully multiply. If feeding is stopped midway and the interval is long, the cellar must be covered and sealed tightly according to the original cellar sealing method to ensure that it is airtight and watertight. Take as much as you use every day and cover it with a straw mat or plastic film promptly after use.
Silage is suitable for all kinds of livestock and poultry, and they generally like to eat it. However, some livestock have to get used to it when they first use it, so they must be fed from less to more and gradually increase.
Although silage is good, it is only used as part of the roughage. In terms of dry matter, the dosage accounts for more than the dry matter of the diet. Because it has a laxative effect, the feeding amount of pregnant females should be controlled. The amount of feeding cannot be generalized, and should also depend on the quality of silage, type of livestock, age, and production direction.
(Taking cattle as an example, the daily feeding amount of lactating cows is kilograms per kilogram of body weight.
The corn stalk harvester is a machine used to harvest corn stalks according to agronomic requirements when the corn is mature or close to maturity. Agricultural machinery. A new type of agricultural machinery researched and developed for the development of new energy and reducing the labor intensity of farmers. It is a low-priced agricultural machinery that is suitable for the popularization of small four-wheeled vehicles in rural areas and can harvest corn stalks when equipped with it. It shortens the time for farmers Friend’s labor cycle frees people from heavy physical labor