Qiqihar manufacturer [circulating tooth rake cleaning machine | steel composite gate]

工作介质：

水或污水

工作环境：

室外

工作时间：

5-10min

Hexian Qianqian Hydraulic Machinery Factory is located in Xinhe County, Hebei Province. It is a professional manufacturer that produces hoist gates and various water conservancy products in strict accordance with the water conservancy industry standards of the People's Republic of China. Our products cover manual screw hoists, manual winch hoists, single/double lifting point screw hoists, single/double lifting point winch hoists, fixed winch hoists, and mobile trolleys Winch hoist, cast iron gate, steel gate, cast iron copper inlaid round gate, cast iron copper inlaid square gate, cast iron copper inlaid gate, curved steel gate, stainless steel channel gate, stainless steel flap gate, regulating weir gate, cast iron racket Door, fiberglass door, rotary grille decontamination machine, bailout grille decontamination machine, circulating rake decontamination machine, rotary grille decontamination machine, bailout grille decontamination machine, circulation type Tooth rake cleaning machine, grab cleaning machine, grab cleaning machine, mobile grab cleaning machine, mobile hydraulic grab cleaning machine, and we also undertake external processing of customized products. Our factory has professional R&D technical knowledge and strict quality management system, and can provide high-quality services in all-round product development and production. We are willing to work with you sincerely to explore the road of economic development and build a brilliant future together! Welcome all new and old friends from the business community!



The circulating tooth rake cleaning machine is suitable for removing floating objects in raw sewage. Its main component is a filter element usually called rake teeth or rake claws. The entire grille component is installed directly on the channel, and the solid matter is captured by the filter belt, sent to a higher position at the rear of the grille drive device through the rake teeth, and then discharged. Both sides of the grille bracket are fixed to the concrete channel and are easy to disassemble. During the installation process of the grille, all sewage in the channel can flow through the grille, and there is no gap on both sides of the grille during the decontamination process. Dead pit. Once the grid decontamination mechanism resumes operation after an interruption in operation, the grid decontamination mechanism can remove accumulated screen slag from a completely blocked grid. The mechanical grid frame, brackets and various moving components are all outdoor type, and the design of all components ensures the longest service life in the harshest environment.



The circulating tooth rake cleaning machine mainly consists of a frame, a driving device (motor reducer), two-side traction chains, guide sprockets, hook grids, Cleaning consists of rotating brush and on-site control box.

Tooth rake

Tooth rake is composed of many small tooth rakes connected to each other to form a huge rotating surface. It can remove slag thoroughly, cleanly, and operate flexibly and reliably. The tooth rake has sufficient strength and rigidity and will not cause bending of the connecting shaft or affect the smooth movement of the rake grid or dechain. The return rake grid after unloading is equipped with a practical and reliable dirt discharge suction nozzle to prevent dirt from adhering to it. The rake teeth are made of stainless steel or nylon.

Frame and frame guard

The frame and frame guard of the grille machine are welded with ordinary steel or stainless steel of considerable size to form a rigid support structure. . The frame and guard are continuously welded to prevent sewage from leaking out. The inside of the equipment frame is equipped with a traction chain circulating motion rail guide. Both sides of the frame are made of ordinary steel plates or stainless steel plates, which form the frame of the circulating tooth rake cleaning machine. Its cross-sectional size is sufficient to meet the maximum working load interception requirements. The gap between both sides of the rack and the grill well is protected from garbage by rubber sealing plates on both sides of the rack.

Rake chain

The rake chain is assembled from a unique set of rake teeth, with strong load-bearing capacity and minimal ring damage. The rake teeth run smoothly, the rake teeth are evenly set, easy to replace and have sufficient strength and rigidity. In order to prevent debris from entering the rake tooth traction chain, a closed traction chain is creatively designed, making the equipment operation more stable and reliable. The rake tooth ends are rounded, which can effectively remove debris and prevent it from returning to the sewage.

The upper part of the equipment is equipped with a cleaning device. This mechanism has flexible movement and adjustable position. It has good cleaning ability. It can remove a small amount of debris adhered to the rake teeth through the reverse rotation of the cleaning brush. to clean, no clogging will occur, and the daily maintenance workload is very small

Driving device

The driving device of the circulating tooth rake cleaning machine has a compact structure and is easy to adjust and maintain. convenient. The driving device is equipped with a chain tensioning mechanism and a mechanical overload device, and the safety factor of the chain is greater than. The driving device is flexible, stable and reliable, and has no abnormal noise.

The driving device is equipped with a protective cover. Its structure is convenient for maintenance and inspection and can meet the requirements of outdoor installation.

The driving shaft can withstand the load of bending moment and button moment at the same time. , the lubrication of bearings and all rotating parts of the equipment can be carried out automatically. The drive motor is grade insulated, , and the rated power of the motor is greater than the maximum actual power consumption of the grille.

Measures to prevent chain falling off

The falling off of the traction chain is generally caused by the horizontal movement of the conveyor chain and poor meshing of the sprocket teeth due to the chain being too long. First of all, during design, The pins on the inside of the conveyor chains on the left and right sides are designed as convex shoulders, and one end of the pin is fixed with a circlip. The conveyor chain will inevitably become longer due to working under tension for a long time. At this time, the tensioner should be adjusted to ensure the normal meshing of the chain drive and ensure the normal operation of the chain drive in the vertical direction.

Underwater rotating wheel

The underwater rotating wheel should be in the form of a guide roller to prevent the entanglement of screen debris in the structure.


Circulating tooth rake cleaning machine
Scope of application


The water inlet of the water intake point of the water supply plant.


At the cooling water inlet of the power plant.


Screening of raw wool scouring and backwashing.


Screening of debris in municipal pipe channels.


Pre-screening of urban and community sewage treatment.


Pre-stage screening of weaving, printing and dyeing wastewater, chemical wastewater, slaughtering wastewater, fur tanning wastewater, and papermaking wastewater to prevent clogging of water pumps.


Waste residue separation in brewing, sugar pressing and soy food processing plants.


Can be used as water washing or residue separation equipment in the processing of fruits, aquatic products, and grains




Ring Type tooth rake dirt cleaning machine
Technical parameters and selection

,
Equipment and rake tooth specifications. Equipment specifications are classified according to machine width. If the machine width exceeds, it will be connected in parallel. The grid gap is divided into various specifications, such as , , , , , , , etc. The grid gap is selected based on the water flow volume, lifting height, total solid-liquid separation volume, shape and particle size of the separated substances. Rake teeth made of engineering plastics, nylon, and stainless steel can be selected according to user needs. The main frame is made of stainless steel and carbon steel anti-corrosion.

,
The standard trench depth for equipment with long and short specifications is , which can be arbitrarily widened or lengthened according to user needs and actual usage conditions.

There are some prerequisites for the operation and routine operation of the circulating tooth rake cleaning machine to ensure the trouble-free operation of the equipment. First of all, the equipment must be arranged and installed according to the instructions in the manual. The important thing is that the working parameters are set reasonably and corrected accordingly. In addition to the above prerequisites, you must also pay attention to a series of related matters when operating this equipment. In particular, observe the general safety precautions. This equipment may only be operated by trained personnel who are familiar with this equipment. In addition, operators are required to conduct regular inspections

to confirm that the equipment is working properly. This equipment can be stopped using the emergency stop switch at any stage of operation. When restarting after a failure, first eliminate the cause of the failure. , Precautions before starting up

Before starting the equipment, you should check whether the transmission mechanism of the grating machine is intact, whether the fastening screws and nuts are firm, and whether there are any obstacles around the equipment to avoid affecting the normal operation of the equipment. Check whether the lubricating oil of the reducer reaches the oil level and whether there is any oil leakage. Be familiar with the functions of various switches, buttons and indicator lights on the control panel. If the motor or control box has been overhauled, before starting, you should also check whether the power supply voltage is consistent with the power supply voltage marked on the motor nameplate, and do a jog test to check whether the motor rotation direction meets the requirements. . When the machine is running and the equipment is running, the operator needs to follow the following steps, close the door of the electric control cabinet, and be familiar with the functions of each button and indicator light. Press the start button and the motor will work. Press the stop button and the motor will stop working. , Operation precautions

Check the temperature rise of the operating parts. The rolling bearings do not exceed ℃, and the speed-regulating motor does not exceed ℃. Pay attention to the lubrication condition of each part. Make sure the device is free of noise and vibration. When an emergency occurs, the emergency stop button should be pressed immediately, and work can be resumed after the fault is eliminated. , Emergency measures

In the event of an emergency, the power supply to the equipment must be cut off, so that the equipment and all electrical systems are powered off. , When the equipment is idle, the power supply to the equipment is usually cut off by starting up and shutting down. If the equipment is to be left unused for a foreseeable period of time after being switched off, the power supply to the equipment should be disconnected at the main power switch. This main power switch must be protected against unauthorized reconnection.


Maintenance and maintenance of circulating tooth rake cleaning machine

Main components maintenance drive motor and high-quality gear transmission motor. Please refer to the motor instruction manual for maintenance details. Transmission parts

Adjust and check key transmission parts, such as the tension adjustment of the drive chain and lubricating oil according to maintenance requirements, idling inspection of shear pins, etc. Main components

The tooth rake is inspected for bending deformation and grid clearance, the traveling chain and sprocket are inspected for breakage, deformation and slack, the bearings and seals are inspected for wear and vibration, and the spindle and support rod guide rails are inspected for wear. , damage inspection, etc.


Circulating tooth rake cleaning machine
Sliding instructions

Moving shaft bearing housed spherical sliding bearing, located in a separate bearing seat

Maximum working hours or days between sliding intervals

Acceptable grease number: Calcium complex grease

Dynamic shaft bearing spherical sliding bearing, end face closed

Maximum working hours or days between slips

Bearing lubricating oil and bearing oil

Inspect and lubricate the chain sprocket after maximum working hours or maximum days

Lubricating oil, ordinary open lubricating oil

Please refer to the manual of the reducer that comes with the machine for lubricating oil details

The main products of Hexian Qianqian Hydraulic Machinery Factory are stainless steel gates and cast iron gates. Cast iron inlaid copper round gate, glass fiber reinforced plastic slap door, adjustable weir gate, cast iron inlaid copper gate, rotary grille decontamination machine, etc.

Machine number 18903298985 Contact person Mr. Lang Zhanyong

】