Year1
- 工作介质：
- 水或污水
- 工作环境：
- 室外
- 工作时间：
- 5-10min
The main products of Hexian Qianqian Hydraulic Machinery Factory are stainless steel gates, cast iron gates, cast iron inlaid copper round gates, fiberglass gates, regulating weir gates, cast iron inlaid copper gates, rotary grille decontamination machines, etc.
Machines Number 18903298985 Contact person Mr. Lang Zhanyong
】
br/>
Structural composition of bucket cleaning machine
Bracing structure
Bracing steel structural members can be installed on platforms or walls to minimize civil construction costs, especially using ready-made civil structures to save costs. Since the track spans over the water intake, The control cables are routed through the brackets to keep the grid platform clean at all times, and the entire appearance is neat and beautiful. In order to be suitable for grids of various specifications and different grid slag storage sites, the track design can be flexible and diverse, and its direction can best meet the requirements of the site and space. requirements, coordinated with the on-site environment.
Bucket
The bucket can be designed according to the types of impurities in the water, such as thick floating objects, branches, weeds, aquatic plants, broken wood, plastic waste, and domestic garbage.
The bucket material can be used according to different uses and water quality
Stainless steel, or (for seawater and sewage treatment)
Copper alloy (for Where non-combustibility is required)
Galvanized steel (general fresh water environment)
Heavy trolley
Heavy trolley includes grab buckets and cleaning machines. of all motors. The lifting motor drives the hoisting spindle through the gearbox to lift the grab. The steel cable is wound around the hoisting drum. The load-carrying trolley also includes a hydraulic power unit, motor, oil pump, solenoid valve, oil filter, pressure release valve, etc., making maintenance extremely easy. Conveniently, the hydraulic hose reel is wrapped with the hydraulic hose for the grab opening and closing plunger. It is driven by the main lift and is maintained in tension by a spring system. If it is used to remove slag from multiple sets of grate cleaners, the highest operating speed is meters, allowing the grab to reach the slag unloading area at the fastest speed, shortening the operating cycle. The load-carrying trolley is made of high-quality materials to ensure long-term use and reduce maintenance.
Bucket cleaning machine operating procedure (automatic mode)
Starting position
The bucket edge grille is lowered to At the bottom, close the grab and lift it upward
The truck and grab run to the garbage dump site and unload or unload the garbage into the collection box. Then, the grab cleaner moves to The second grid cleaning position will continue to operate automatically until cleaning is completed.
Product Features of Bucket Type Cleaning Machine
The bridge-type guide rail design of the cleaning machine makes the working surface clean and tidy, and optimizes the effective working area of the working platform.
The installation position of the support column can be flexibly positioned according to the site conditions to adapt to any site conditions.
There are no immersed parts underneath, thus improving equipment reliability and reducing equipment maintenance.
The maintenance cycle is short, twice a year.
The transmission unit has a long life cycle.
Noise operation is suitable for urban venues.
The working load is between kilograms and kilograms (referring to the weight of single claw cleaning).
The bar spacing is in the range of (or above).
The depth of pollution can reach meters.
Straight gratings can also be cleaned.
Both sides of the claw are open, which can remove dirt such as long tree trunks. At the same time, it can easily remove dirt such as wood, oil drums and plastic sheets.
The system does not require a backwash tank or screen slag conveying unit. The dirt cleaning claw can transport dirt directly to the discharge area.
Consider multiple discharge zones.
The rail can be made into a curved rail to complete the dumping of waste to the designated location.
Line speeds in the range between meters and meters per minute can reduce overall cleaning cycle times over wider grill areas.
Fully automatic operation is realized through manual control, time control and liquid level difference control. At the same time, remote monitoring can also be achieved.
Manual operation can be achieved through the hand control handle. This function is particularly useful in the event of a machine control unit failure.
Low power consumption, saving energy and reducing operating costs.
The structural design complies with environmental protection requirements.
The structure and working principle of the bucket cleaning machine
It consists of a winch mechanism, a wire rope, a rake bucket, a wire rope pulley, a rake bucket opening and closing device, and a mechanical process. It consists of torque protection, mobile driving, ground fixed track and mobile driving positioning device. The positioning and cleaning actions of the whole machine, rake bucket lifting, rake bucket opening and closing, rake bucket dirt scraping, etc. are the same as those of the fixedly installed wire rope traction rake bucket grille decontamination machine. Only the upper frame and lower frame are separated. , the upper racks are all located on the mobile crane. Its working principle is that during decontamination, the frame is controlled by the travel switch to move to the position of the grid that needs to be decontaminated. Only when the upper and lower frames are accurately aligned can the rake bucket be lowered smoothly for decontamination. For wide grilles, after the decontamination is completed, the decontamination machine moves the effective width of the rake and continues decontamination until the dirt on the grille surface is completely removed and the water level difference before and after the grate reaches the normal value. For multi-channel distributed grilles, after the decontamination machine has decontaminated the grilles in one ditch, it will move to another ditch and continue decontamination until the dirt on the grating surfaces of all ditches has been removed and the water level difference between the front and rear of the grates reaches the normal value. until.
WhatsApp
