Year1
- 材质结构：
- 全钢结构
- 规格：
- 1500*800*2350
- 是否可以定做：
- 可以定做
1. Overall specifications***
☆ Internal effective operating space (when the window is closed)***
2. Cabinet part
Cabinet body The combination adopts a three-section modular cabinet. The upper cabinet (the middle of the detoxification cabinet (operating table)) and the lower base cabinet (containing independent storage cabinets and independent water, electricity, and gas pipeline system storage cabinet designs)
The outer shell is made of The cold-rolled steel plate produced by Shanghai Baosteel is bent and formed with thick wall. After pickling and phosphating, the surface is electrostatically sprayed with epoxy resin powder.
The inner lining plate is made of anti-corrosion plate with a thickness of . The material of the guide plate is the same as that of the lining plate. The installation position and angle of the guide plate must make the exhaust gas distributed evenly without dead corners to ensure that gases of different specific gravity can be effectively discharged.
, The operating surface is of solid physical and chemical quality The countertop
and the base cabinet are made of cold-rolled steel plates produced by Shanghai Baosteel. The wall thickness is thick. After pickling and phosphating, the surface is electrostatically sprayed with epoxy resin powder.
The door panels of the base cabinet are made of the same material as the bottom. Cabinet and shell.
, Auxiliary air inlet is installed under the front sealing plate of the detoxification cabinet and is made of cold-rolled steel plate. It can provide air source when the window is closed.
, Adjustment door
) The track is made of stainless steel.
) The left and right suspension steel cables of the adjusting door are installed, and the steel cables must be completely hidden in the track. When pulling up and down, there will be no friction with the track to ensure the safety of the steel cable and avoid chemical corrosion problems.
When adjusting the door handle design, it must meet ergonomic requirements to facilitate the user to pull up and down to apply force.
Adjust the door opening height (inclusive) and above.
The adjusting door glass is made of thick safety tempered glass.
, Steel cable pulley set
) The pulley fixing seat is made of steel plates of thickness (inclusive) and above, and has a double-wrap anti-fall design to ensure stability.
) The pulley is made of Ф nylon.
) The counterweight adopts the design of left and right double counterweight boxes.
The air collecting cover is made of polymer plastic material and is integrally formed. The bottom inlet is a rectangular opening. The top outlet pipe diameter is about Ф. The height of the outlet connecting pipe is (inclusive) or above, which facilitates the connection of the air duct sleeve.
. The lighting equipment adopts a full-cover lamp holder design (with heat dissipation holes and thick glass at the bottom, and a fluorescent lamp is included in the lampshade.
. The air volume requirements are calculated based on the average wind speed on the surface of the detoxification cabinet. ( The exhaust air volume is provided by the exhaust duct system).
The surface wind speed average is when the adjustment door is fully opened and the surface average wind speed is met. At any surface wind speed measurement point, the measured wind speed value must be within the range. .
WhatsApp
