Butter head (imported)

盒装：

10个/盒

1. Product Introduction
The butter head is also called butter spout, butter spout, and butter filling head. The butter head eliminates the traditional spiral method that consumes time and can withstand pressure up to more than 100 times. The four-claw quick connector saves time and is susceptible to chemicals. The rubber expands rapidly under extrusion pressure, and the four claws tightly wrap and adhere the grease nozzle. The rubber is made of special rubber material (which can withstand high-pressure impact. The rubber head will not be deformed and damaged under high-pressure extrusion, causing the medicine to flow out. The spring steel claws are quenched , blackened, durable, easy to plug in and out, no slurry leakage, and no jamming.
2. Use of butter nozzle
Mainly used for the connection between high-pressure pipes and high-pressure water-stop needles.
3. Precautions
The rubber pad inside the butter head will be damaged for a long time under the impact of high pressure.
It will also be damaged due to the corrosion of the solvent in the chemical grouting material.
Due to solvent cleaning, the sealing gasket inside the oil head will also be damaged due to corrosion.
* During grouting, if the sealing gasket inside the oil head is found to be broken, it must be replaced in time.
4. Common situations during grouting
. The butter nozzle leaks grout during grouting
Causes and methods The rubber pad inside the butter head is worn. Disassemble the butter head, replace the rubber pad with a new one, complete the reorganization and put it back together< br/>. The butter head and the water-stop needle are loose during filling and cannot be connected.
Causes and methods: The butter head or four claws are worn. Replace the butter head with new ones.