JS cement-based waterproof coating (5KG/barrel)

桶装：

5KG

This product is a two-component waterproof material made of waterproof emulsion and mineral aggregate imported from Germany as the main materials, and added with a variety of additives. It is suitable for waterproofing and moisture-proofing treatment of walls and floors in kitchens, bathrooms, basements, swimming pools and other areas. It has good adhesion to the concrete base surface and can form a tight and permanent bond with it to prevent water penetration.
Regular script
Characteristics of regular script
Regular script
Regular script has good flexibility and can withstand slight vibrations of the building and micro-cracks caused by various reasons.
Regular script
Regular script can be used for waterproofing on the water surface facing the front or on the water surface facing the back, and the effect is equally excellent.
Kaiti
After the Kaiti material dries, it can be directly pasted on various ceramic tiles.
Required steps for Kai Ti construction
Kai Ti
Kai Ti
For Kai Ti, first pour the liquid components into a clean bucket, and while stirring, slowly pour the powder components into the liquid. In the bucket, stir thoroughly for 10 minutes until a uniform slurry without raw dough is produced. The construction base surface is moist but there should be no open water. After stirring, let it sit for about 10 minutes. Stir before use before construction.
Regular script
Regular script
For regular script, apply the slurry evenly on the treated substrate with a brush or rubber scraper. In order to ensure the waterproof quality, the product must be painted in two layers. Joint walls The corners must be painted with a brush in cross directions. After the first layer is done, wait until it is slightly dry (just not sticky) before applying the second layer. The interval is an hour (after curing, proceed to the next step).
Requirements for the base surface of regular script
Regular script
The base surface of regular script must be stable, clean, flat and smooth, free of dust, oil, dirt and other debris. Obvious holes and cracks must be blocked and smoothed with cement mortar. The base surface should be moistened with clean water before construction, but no open water should exist.
Regular script
Precautions for regular script
Regular script
Only after the water layer of regular script has dried, can other covering layers be made. Construction cannot be performed below ℃, and the dried slurry is prohibited from being reused.
Kaiti
Kaiti can be constructed in a very humid and non-ventilated environment, otherwise it will affect the film formation.
Regular script
A layer of fiber mesh should be added to the points and corners of regular script according to the requirements of the specification.
Product Color
Gray