JS cement-based waterproof coating (10KG/barrel)

Polymer cement-based waterproof coating
Kaitai 1. Product introduction
Kaitai
Kaitai This product is made of waterproof emulsion and mineral aggregate imported from Germany as the main raw materials, and is processed by adding a variety of additives The two-component conforms to the waterproof material. It is suitable for waterproofing and moisture-proofing treatment of walls and floors in kitchens, bathrooms, basements, swimming pools and other areas. It has good adhesion to the concrete base surface and can form a tight and permanent bond with it to prevent water penetration.
Regular script
2. Characteristics of regular script
Regular script
Regular script has good flexibility and can withstand slight vibrations of the building and micro-cracks caused by various reasons.
Regular script
Regular script can be used to face the water
Regular script can also be used to waterproof the back surface, and the effect is equally excellent.
Kaiti
After the Kaiti material dries, it can be directly pasted on various ceramic tiles.
KaiTi
3. Required steps for KaiTi construction
KaiTi
KaiTi
KaiTi first pour the liquid components into a clean bucket, and slowly add the powder while stirring Pour the components into a bucket filled with liquid and stir thoroughly for several minutes until a uniform slurry without raw dough is produced. The base surface should be moist but not exposed to water. After stirring, let it sit for about a minute. Stir before use before construction.
Regular script
Regular script
For regular script, apply the slurry evenly on the treated substrate with a brush or rubber scraper. In order to ensure the waterproof quality, the product must be painted in two layers. Joint walls The corners must be painted with a brush in cross directions. After the first layer is done, wait until it is slightly dry (just not sticky) before applying the second layer. The interval is an hour (after curing, proceed to the next step).
Regular script 4. Base surface requirements
Regular script
The base surface of regular script must be stable, clean, flat and smooth, free of dust, oil, shedding and other debris. Obvious holes and cracks must be blocked and smoothed with cement mortar. The base surface should be moistened with clean water before construction, but no open water should exist.
Only after the regular water layer has dried and solidified can other covering layers be made. Construction cannot be performed below ℃, and the dried slurry is prohibited from being reused.
Kaiti
Kaiti can be constructed in a very humid and non-ventilated environment, otherwise it will affect the film formation.
Regular script
A layer of fiber mesh should be added to the points and corners of regular script according to the requirements of the specification.
Regular script
Regular script product color is gray
Regular script
Regular script product features are flexible, breathable, impermeable, non-toxic, odorless, green and environmentally friendly.
Regular script 5. Things to note
Regular script