Year1
- 型号：
- 230
- 重量：
- 260
- 尺寸：
- 110*100*2500
The crusher structure has two types: automatic suction and forced feeding (the crusher is used according to the machine model. When the material is sucked in or sent into the crushing chamber, it will be quickly crushed under the continuous blow and collision of the hammer. Crushed into powder or granular form, and then affected by centrifugal force or air flow, it is discharged through the sieve hole into the impeller chamber under the crusher.
Material mechanism When the material propeller rotates, the impeller chamber of the small hopper of the material is forcibly fed into the conveyor The pipe is then lifted to the top of the mixing barrel by the propeller. At this time, the material is evenly spread into the mixing barrel. The material in the mixing barrel rises, falls, and rotates left and right continuously to form a mixing process, thereby achieving a uniform mixing effect.
Feed mixer quotation
Model
Production (/batch)
Dimensions
Mixing time (minutes/batch)
/>
Supporting power
Machine weight
Price
**
**
**
**
Contact number
Company address No. Fuyuan West 3rd Street, Confucius International Trade City, Qufu City, Shandong Province
>
Installation, debugging and use
Edit
When installing a fixed unit, ensure that the base of the unit is placed horizontally (if it is uneven, use wooden boards to flatten it, otherwise it will easily cause vibration of the unit.
Check whether the bolts of each connecting part are If the manual propeller shaft is loose, check whether there is any jamming and whether the advancement is flexible, and whether the crusher rotor hammer is flexible and reliable.
Source, switch, and wires must be insulated reliably and easy to control. Do not Use a fuse or fuse that does not match the rated current of the motor matched with the unit. The upper motor must be equipped with an overload protection device.
Check the direction of motor rotation on the machine (without compliance). The motor should rotate in the direction specified by the arrow on the sign, otherwise there will be It may damage the machine. If the steering is wrong, you can change the position of any two joints of the motor.
Check the tension of each transmission belt (the motor can move left and right, and the impeller can move forward and backward to make it suitable.
Check whether there is powder leakage in the feeding pipe and the connecting parts of the mixer. Look through the observation hole to see if there are any debris in the main hopper and the propeller. If not, it is normal.
One machine warehouse for preparing feed is one batch. Weigh out the ingredients needed to mix the feed. Start the mixing motor first, and then start the crushing motor (otherwise the impeller will be stuck and the motor will burn out. Feed the materials that do not need to be crushed from the auxiliary hopper. Add the materials that need to be crushed into the fried rice cake crusher. Do both at the same time until all the main and auxiliary materials are processed. Continue stirring for another minute to complete a cycle. After the finished product is bagged, proceed to the next batch of production. Note that raw materials with small amounts of addition must be expanded step by step
Remove debris, metal, sand and gravel in the material in a timely manner to avoid Damage
Model
Production (/batch)
Dimensions
Mixing time (minutes/batch)
Supporting power
Machine weight
Price
* *
< br/>
**
< br/>
**
< br/>
**
< br/>
>
Safety Precautions
Edit
The group must have grounding and leakage protection devices to ensure the personal safety of the staff. Safety. When the machine is running
It is strictly forbidden to extend the support, wooden sticks, and iron cavalry into the machine, and the machine maintenance door is not allowed to be opened.
When the material port is blocked, do not force feed with your hands, wooden sticks, iron rods and other materials. Enter, you can pause the machine and wait for the feeding port to be cleaned before continuing to work.
Under normal circumstances, do not start the unit with load. When the machine is running normally, adjust the control insert plate to the appropriate position, and the main and auxiliary materials should be fed evenly , subject to the motor not being overloaded.
When replacing the sieves with apertures smaller than millimeters, the feeding insert plate set on the feeding tube should be adjusted appropriately, otherwise the grinding disc will be stuck due to excessive loading, damaging the sieve bottom and burning. Broken motors and electrical parts, etc.
The unit should be installed in a ventilated and light-transparent place away from fire sources.
WhatsApp
