Henan Zhengzhou DY-5 small capping machine manufacturer direct sales price

Small capping machine factory direct sale in Zhengzhou, Henan
Yiguang Pharmaceutical Machinery is a pharmaceutical machinery manufacturer in Changsha specializing in the production and sales of capping machines. It is cheap, has quality assurance and meets certification requirements. The capping machine is simple to use and does not require debugging. , each capping machine will be tested before leaving the factory to avoid troubles caused by malfunctions.
Electric capping machine
The oral liquid capping machine is a desktop three-knife cyclone capping machine with a stainless steel appearance, safe and convenient to operate. When working, the capped bottle does not rotate, and the three cyclone knives are evenly distributed Rotary capping sealing, the knife handle is designed with a spring structure, the distance between the three knives can be fine-tuned, strong adaptability, high capping yield, this machine is an ideal choice for military units, hospitals, laboratories, and small pharmaceutical factories.
Main technical parameters of the oral liquid capping machine
, usage specifications for sealing ml glass bottles
, production capacity bottles/minute
, motor power,,
, appearance dimensions
, Machine weight
Detailed introduction of oral liquid capping machine
1. Adjustment of the upper arm when rolling bottles of different specifications
This machine can be used to roll bottle caps. When using either For bottles of this specification, just place the bottle of that specification on the pallet, hold the cross arm with one hand, and loosen the nut on the left side of the cross arm with the other hand to lower or raise the cross arm until the capping head is about 1 mm from the bottle cap. When tightening the nut, use the included hexagonal wrench to close the support ring against the cross arm and lock the support ring. (Note: When tightening, pay attention to the alignment of the capping head and the bottle cap.)
2. Adjustment of the support block
Put the bottle into the lower support block and loosen the two screws on the support block. Move the bottle and lower mold block together until the capping head is aligned with the bottle cap, and then tighten the two screws on the mold block.
3. Specific operation method
Put the bottle filled with liquid and capped on the lower tray, lean on the support block, hold the bottle with one hand, and push the handle backwards and down with the other hand Tighten, then the tray holds the bottle and lifts upward until the bottle cap and the capping head are pressed tightly.
After the bottle cap and the capping head are pressed tightly, the three capping cutter heads that keep rotating rotate several times to tighten the bottle cap. (Note) The motor must run clockwise.
Push the handle forward so that the rolled cap returns to its original position along with the tray. The entire operation process is completed. Repeat the above operation every time you roll a bottle cap.
4. Adjustment of the capping head
The machine is equipped with multiple capping heads, and the capping head can be selected according to the size of different bottle caps. You can try it with a bottle before formal use.
If the cap is not rolled tightly, you can unscrew the locking nut of the capping head and unscrew the upper capping head counterclockwise, and then lock the upper fixing nut.
The cap is rolled too tightly and there is a phenomenon of rotary cutting of the bottle cap. You can unscrew the locking nut of the upper capping head and screw in the upper capping head clockwise, and then lock the upper fixing nut.
If the lower edge of the bottle cap is not tightened tightly, the eccentricity of the three rolling cutter heads can be appropriately adjusted according to the actual situation. If the tightening is too tight and the bottle may be crushed, the eccentricity of the three rolling heads can be appropriately increased.
Don’t choose the most expensive capping machine, only choose the best capping machine. Changsha Yiguang Pharmaceutical Machinery is your right choice. After more than ten years of hard work, we have rich experience in producing capping machines. As a relatively mature product, there is no doubt about its quality and after-sales service. To inquire about the capping machine, please call us. We will answer your questions patiently with our professional technical knowledge. You can also browse our website.