220v industrial vacuum cleaner | wet and dry industrial vacuum cleaner | WX-3078P

Industrial vacuum cleaner | Wet and dry industrial vacuum cleaner |
Wedel push suction industrial vacuum cleaner
Technical parameters
Product model
Motor power
Voltage and current
Dust bucket Capacity
Machine noise
Vacuum pressure
Motor air volume/
Filtration area
Filtration accuracy
Power supply length
Machine weight
Outer box Dimensions**
Machine origin: Shanghai
Details
A push-suction dual-purpose vacuum cleaner, it is equipped with a wide push-suction head in front, which can be pushed and sucked at the same time. The whole machine adopts the following The hood design effectively prevents the sun and rain from affecting the internal circuit system. There is a protruding part on the handle above the machine head, where power cords and spare parts can be hung.
This machine uses an imported motor, which can work for a long time and has a lifespan that is twice as long as that of ordinary motors. The machine is equipped with three motors and can reach the maximum power. The switch has a waterproof design and is easy to operate.
Effective layer filtration system, filter element made of high acid fiber material, can filter dust with high filtration effect. It is innovatively made of modified nylon fiber. The filter area and surface are very smooth, which can reduce the adhesion rate of dust. up to 2 times longer than traditional filters. Say goodbye to the past need to clean filters frequently and improve work efficiency.
This machine can vacuum dust and water. It is equipped with a water-absorbing float. When the water is sucked to a certain level, the float will detect the water level. The machine will automatically float up and the machine will still operate normally, but there will be no suction. This causes water to directly enter the motor, which plays a very good role in protecting the motor.
The installation of the suction scraper is also very simple. After purchasing the machine, you can install it according to the steps in the instruction manual. There is no need to disassemble it. There is a foot pedal at the rear of the machine to control the lifting and lowering of the suction scraper, which is convenient and quick. It was first applied to the push suction head of a vacuum cleaner.
This series of industrial vacuum cleaners are suitable for dust removal, recycling and supporting use in hardware, machinery, electronics, food, chemical, and other industries. It can more effectively collect ultra-fine powders such as ceramic powder, plastic spray powder, toner cartridge powder, metal powder, etc., and can quickly clean iron filings, sand, wood chips and a large amount of dust.
_Copy