Supply pneumatic conveying system equipment with a gold medal after-sales team

In a pneumatic conveying system, the pipes at the rear of the system are more severely worn than the pipes at the front. Therefore, after a period of transportation, the pipes need to be rotated at a certain angle and the rear pipes moved to the front to make them wear evenly. The pipes are installed It must be fixed firmly, because the swaying pipe will disturb the normal running trajectory of the material, and the collision and friction inside the pipe will intensify. In a long-distance conveying system, through design calculations, the method of expanding the diameter of the conveying pipe can be used at a certain distance. Reduce the conveying speed, but in the area of diameter expansion, the lowest speed for material conveying must be ensured, otherwise it will cause blockage. Hengtong Company provides the following anti-wear methods to choose from
, surfacing alloy on the wear surface of the equipment
, heat treatment of the inner surface of the equipment
, using inner lining equipment
, which is durable Grinding elbow
, lined with ceramic pipes
Dust removal system
The dust removal system is very important in the pneumatic conveying system. It is related to the environmental assessment of the project. The dust removal system standard is exhaust/, Hengtong Company’s standard configuration in the dust removal system is/generally configures a pulse dust collector in the dust removal system. However, when the installation height is limited or in special occasions, a cyclone separator is also used as the primary dust removal. The dust removal efficiency of the cyclone separator is in the range, so the following It is also necessary to add a pulse dust collector as a precision dust collector.
The design of the dust collector system is also very important, which is related to the operational stability of the entire system. According to the different material properties and different specific gravity of the materials, dust collectors with different filtering areas need to be selected, otherwise the design will not match. The system pressure is unstable. Through years of professional experience, Hengtong Company can match users with various forms of pulse dust collectors according to different working conditions.
Silo system
The silo system is used to temporarily store bulk materials during the transportation process. Most silos have a cone or pyramid structure and have both storage and discharging functions. , the production of the silo system must be based on the problems that different materials will have during the storage and unloading process and the flow mode of each material. When designing the silo system, the dynamic load and static load when the material is full should also be considered. When the material is discharged, the A series of factors such as gasification and vibration during feeding.
The most common problems in the silo system are arching and bridging. Different silo cone discharge structures can be designed according to different material characteristics, such as biased material openings, curved hoppers, inner wall coatings, gasification assist Different modes such as flow, etc., the configuration of the silo system usually includes a vacuum release valve. Material level meter. Measuring device, automatic discharging device, etc.
Control system
The automation of the control system electrical system is an important symbol of industrial modernization and the core technology of modern science. It enables the control, monitoring and operation of products to be carried out as scheduled without a few people. It can improve the reliability of work, economical operation, labor productivity, improve working conditions, etc., and liberate people from heavy physical labor. Electrical automation technology is used in pneumatic conveying systems. It is an indispensable technology that reduces the error rate of operations and improves production efficiency. The use of automated control systems can make pneumatic conveying more efficient with half the effort.
The electrical control system is a combination of several electrical components. The production of the electrical control system needs to be set according to the equipment parameters in the pneumatic conveying system and the causal relationship between each equipment. Hengtong Company customizes it according to the different working conditions of customers. The control system for different operations realizes the convenience and practicality of the control system through the control panel or settings. By optimizing the causal relationship between the equipment of the conveying system and setting up monitoring and protection functions, the safety and stability of the pneumatic conveying operation are ensured. .
Electrical control systems are developing in the direction of digitization. Hengtong Company is pursuing the research and development of independent intellectual property rights for electrical automation control systems, recommending and using digital automatic control systems for users, and building digitization can target information as a whole and integrate information The overall data is input into the computer, so that people can check relevant data anywhere and at any time. The digital development of electrical control systems can rapidly develop the intelligence of equipment and reduce the labor and operating costs of enterprises.