Year1
- 材质：
- 普通碳钢|不锈钢304均有
- 结构：
- 螺旋式|圆管
- 动力：
- 3-5.5KW|380V
Spiral compound fertilizer powdering machine, spiral powdering machine, Shandong stainless steel powdering machine, the most professional manufacturer, chicken essence powdering machine, salt and MSG powdering equipment, fertilizer powdering screw conveyor, small particle powder anti-caking agent powdering machine, high-quality flour powdering machine
Compound fertilizer agglomeration is called the cancer of compound fertilizer. Many experts and technicians are studying how to solve the problem of compound fertilizer agglomeration. At present, a powdery product called magnetic bright thorn is spread on the surface of compound fertilizer and uses the same The principle of magnetic repulsion has greatly alleviated the agglomeration problem of compound fertilizers. However, how to add the magnetic brightener evenly is very important. According to the investigation, Linyi Dahua Machinery Factory uses a screw conveyor dusting machine to add the magnetic brightener. Through continuous exploration The transformation has now well met the needs of production.
Features of the dusting machine produced by Linyi Dahua Machinery Factory:
The dusting screw conveyor is used to quantify the coated powder when packaging finished compound fertilizers. Conveying, the purpose of which is to prevent the finished product from clumping during subsequent storage. It is widely used in the production of compound fertilizers and organic and inorganic compound fertilizers.
This powder machine can automatically adjust the speed.
Safe use regulations for spiral powder machine:
1. Safety requirements. The equipment must be equipped with mechanical and electrical safety protection devices in accordance with relevant specifications. .The protective device should be regularly inspected and improved by a dedicated person, and its reliable and effective use should be ensured. .It is strictly prohibited to mix various debris such as metal and plastic woven bags into the equipment. .The lower mouth of the feed hopper should be equipped with a pumping plate valve, which must be closed one minute before shutting down to prevent damage to the equipment if it cannot be started next time. 2. Trial operation. Empty trial operation of the spiral powdering machine: ① Check whether there is any debris left in the cleaning machine. ② Check that all fasteners, bearing devices, etc. should be sufficiently lubricated. ③After completing the above preparations, do not add materials. Use manual turning first. It should feel light and flexible without any abnormal noise. You can start the machine several times. If the operation is normal, you can start the machine and run continuously. ④ There should be a dedicated person responsible for observing the operation during the test run. If any problems are found, they should be dealt with promptly. ⑤ When the empty test run is small and there is no vibration, impact or abnormal sound, and it is satisfied, the load test run can be carried out. . Load test operation of the spiral powder machine: ① First start without load and run normally, then gradually add materials to prevent overloading. ② When adding materials, metal, plastic woven bags and various hard debris should be prevented from being mixed into the equipment, causing damage to the machine or other (personal) accidents. ③When the light load operation is small and there are no abnormal phenomena, it can be put into production. ④The machine must be emptied of all materials before it can be parked.
If you need help, please call: Linyi Hedong District Dahua Machinery Factory is always ready to provide you with better products and the most economical and reasonable solutions. Our technical experts are always available to provide you with technical assistance and hope to work with you. You establish a long-term cooperative relationship that pursues higher value! Our factory has been a member of Ahli’s Integrity Pass for many years and has a high degree of credibility!
WhatsApp
