Year1
- 定制：
- 定制
Fully automatic water softener
Working principle
When the raw water containing a variety of ions passes through the resin layer of the soft water tank, the water
+
,
+
Ions are adsorbed by the resin, and +
ions are exchanged and released at the same time, thereby softening the hard water.
Product Features
●High degree of automation
Manual equipment commonly used in China requires manual labor The quality of the effluent is continuously monitored to determine the end point, and then the regeneration process is completed according to a complex operating procedure.
After regular initial installation and debugging, the fully automatic water softener only needs to manually add regeneration salt regularly to achieve continuous water production under fully automatic conditions, saving a lot of manpower and material resources.
●Large working exchange capacity and low salt consumption
Commonly used manual equipment, the operation of the staff directly affects the exchange capacity and salt consumption. At present, the working capacity of domestic softened water equipment is generally between ~gram equivalent/
(Resin and salt consumption are very high, generally reaching ~gram/gram equivalent.
Fully automatic softened water equipment avoids the influence of human factors and achieves strict automatic control. Generally, it can Make the resin working exchange capacity reach gram equivalent/above, while the salt consumption is less than gram/gram equivalent.
●Low power consumption
Commonly used manual equipment requires at least one salt pump, and salt pumps often have quality problems. It consumes a lot of power and requires a lot of maintenance work. However, fully automatic equipment does not require any pumps and the normal power consumption is less than 10%.
●Anti-corrosion and anti-pollution
Traditional manual equipment uses metal casings, and then performs internal and external anti-corrosion Due to anti-corrosion quality problems, resin poisoning is often caused, so the resin must be resuscitated regularly.
The bed of the fully automatic water softener is made of off-duty steel, and the pipelines are made of engineering plastics, which have strong corrosion resistance. Completely solves the problem of equipment corrosion.
●Reasonable structure and convenient installation
Traditional manual equipment occupies a large area and requires special civil foundations for installation. The fully automatic equipment has a reasonable overall design and covers an area similar to that of traditional manual equipment. The equipment is greatly reduced, and the light structure makes the equipment easy to install and can be flexibly arranged according to site conditions.
When the capacity of the resin +
and +
ions is saturated, regeneration must be performed. The process is to use the salt water in the brine tank to flush the resin layer, replace the hardness molecules on the resin, and discharge it out of the tank with the flushing. The resin has restored its softening and exchange ability.
●Reliable energy production and stable operation
The fully automatic softened water equipment in the United States has been inspected, tested, introduced and promoted throughout the country by the Water Treatment Association for more than six years. Judging from many years of practical application, the equipment has stable operating performance, sensitive and reliable action, and has also No abnormality has occurred, and the company's complete after-sales service has kept the equipment in good operating condition.
Scope of application
Can be widely used in industrial boilers, heat exchangers, schools, hotels, restaurants, laundry equipment, food industry, textile, and printing industries.
WhatsApp
