Supply of gutter greenhouse engineering drainage channels

Gutter
As a component of the greenhouse frame, the greenhouse gutter not only bears the function of removing rain and snow water, but is also an important stress-bearing component of the greenhouse structure. When designing greenhouse gutters, it should be noted that in areas with large indoor and outdoor temperature differences, such as northern regions, condensation water is easily generated on the indoor surface of the gutter. Therefore, the shape of the gutter should be designed to facilitate the removal of condensation water. The water cross-section of the gutter should be To meet the needs of rainwater removal, the mechanical performance of the gutter should be able to meet the needs of the structure.
The best way to avoid gutter leakage
It is not suitable to use cement produced by small factories with unstable strength in the construction of gutter. Moreover, before using the cement, a sample test must be taken. After passing the test, the construction of gutter steel bars can be started. For hot-rolled smooth round steel bars, cold-rolled ribbed steel bars should be avoided as much as possible, and the steel bars must be certified for sample testing and can only be used after passing the test.
Mark the appropriate temperature.
The gutter work should be completed as soon as the pouring is completed, and no work seams or gaps should be left at the gutter shrinkage joints. It must be determined according to the concrete water-cement ratio plan, and the water-cement ratio cannot be increased arbitrarily. The concrete must be vibrated densely, the steel bars must be tied to the plan, and the anchor length must be such that the fixed-length steel bars must be carefully protected after being tied. People are not allowed to step on them during construction. During construction, concrete must be left for testing according to regulations.
/ Gutter
/ Gutter