2000*1500 boring and milling machine table price

Hebei Beizhong supplies boring and milling machine workbench prices, boring and milling machine workbench models, boring and milling machine workbench
Uses are mainly used for machine tool processing working planes, boring and milling machine workbench
There are holes and The groove is used to fix the workpiece and clean the iron filings generated during processing. Common machine tool workbenches include floor-standing boring machine worktables, floor-standing milling machine worktables, and end milling machine workbenches.
The boring machine workbench is made of high-quality high-strength cast iron. The hardness of the workbench has passed two manual treatments (artificial annealing degree, natural aging years). This product has stable accuracy and good wear resistance.
Boring and milling machine table
Precision grade, grade, fine planing.
Floor-standing boring machine workbench structure The standard workbench product structure is made of ribbed type with reasonable structural design. It can also be made in box type according to needs.
Surface treatment of the floor-standing boring machine workbench. The workbench has been scraped and ground to ensure the accuracy of the workbench. Remove molding sand and paint anti-rust paint on non-working surfaces.
The installation methods of the boring and milling machine table
are platform bracket installation, ground anchor installation, pad iron installation, and anchor bolt installation. The ground anchor installation boring machine workbench can design the ground anchor installation. First, the user makes the foundation and embedded holes according to the drawings of the cast iron platform, and then places the ground anchor into the reserved holes set in advance to adjust the level of the cast iron platform. The cast iron platform for pad iron installation is adjusted to a level and the load is evenly distributed on each fulcrum. Ambient temperature ℃. Vibration should be avoided during use. The cast iron platform adopts the advantages of pad iron installation, which is quick to install and easy to move. The installation method of the cast iron fitter's workbench for anchor bolt installation is designed according to the user's requirements. The installation procedure for anchor bolt installation will place the adjustment pad in the appropriate position, put the bolts into the holes in the foundation, and lift the platform into place at the appropriate height. Put the bolts into the anchor bolt holes, screw on the nuts and place them on the backing plate. Find the correct position and remove the fixing device on the slide base, and clean the platform. Use a level to adjust the machine, which should be placed on the guide rail. Straighten the anchor bolts and pour concrete into the holes. After solidification, adjust the installation accuracy of the workbench so that the horizontal deviation is no greater than 1, tighten the anchor bolts, and smooth the surrounding bottom surface with cement.