Price of CK5263 CNC double column vertical lathe

b: > : (,,) : : >C
> : (,,) : >CNC double-column vertical lathe
: (,,) : : >AC servo electric
: ( ,,) : : >b) The synchronous pulley and the synchronous belt drive the ball screw to rotate< br<>on it
: (,,) : : >Nut
: (,,) : : >Driving the tool holder to move along the guide rail of the slide plate to realize the feed movement of the axis. The key connects the electric
: (,,) : : > crankshaft and the synchronous pulley
: (,,) : : >. The ball screw has two supports, front and rear. The front support is composed of three angular contact ball bearings, of which two bearings have a large mouth backward and one bearing has a large mouth forward, bearing bidirectional axial load. The bearings of the front support
: (,,) : : > are preloaded by nuts
: (,,) : : >. The subsequent support is a pair of angular contact ball bearings
: (,,) : : >. The large bearings
: (,,) : : > are placed opposite each other and are supported by nuts
: ( ,,) : : >Preload. This
: (,,) : : ><:>
b: > : (,,) : : >This kind of support form with fixed ends of the screw has both structure and technology. It is more complicated, but it can improve and ensure the axial stiffness of the screw
: (,,) : : ><:>
b: > : (,,) : : >degree. The pulse encoder
: (,,) : : > is installed at the tail of the AC servo motor. and are buffer blocks that provide protection in the event of an unexpected collision
: (,,) : : ><:>
b: > : (,,) : : >.
: (,,) : : >.
: (,,) : : >C
> : (,,) : >CNC double-column vertical lathe
: : : >Maximum processing diameter< b:,<>Maximum workpiece Height (< b<>) < b:<>, workbench diameter: < b<>, maximum workpiece weight (< b<>): < b<>, workbench speed series: stepless, workbench speed range :< b/<>, the maximum torque of the worktable: < b<>b< b<>, < b,<> the maximum cutting force of the vertical tool holder: < b<>, the maximum cutting force of the left tool holder: < b<> , the maximum cutting force of the right tool holder: < b<>, the horizontal stroke of the left and right vertical tool holders: < b<>, the vertical stroke of the left and right vertical tool holders: < b<> The feed level of the right tool holder: stepless, the right tool holder Feed range: < b./<>, right tool post rapid movement speed: < b/<>, left tool post rapid movement speed: < b/<>, left tool post feed range (CNC axis): < b ./<>Maximum rotation angle of the left and right tool holders: r, cross-sectional size of the tool bar: < b*<>, ram cross-section: < b<>, cross-beam stroke: < b<>, cross-beam lifting speed: < b/<> , Cross beam lifting motor power: < b<>, Main motor power: < b<>,
> : (,,) : >CNC double-column vertical lathe
: : : >Total machine tool power: < b<>, machine tool size (length< b<>width< b<>height):< b**<>, machine tool weight< b(<>approximately< b)<>:< b<>, CNC system
: : : >
: : : >:
:b : >
: : : >.
:b : ><:>