Price of CK5120 CNC single column vertical lathe

b: > : (,,) : : >C
> : (,,) : >CNC single-column vertical lathe
: (,,) : : >When the machine tool is in continuous operation ,
: (,,) : : >The rotation speed of the spindle is within the range
: (,,) : : >~r/, and the spindle should be able to transmit the full power of the motor. > : (,,) : : >Constant power region II (solid line). In this area, the maximum output torque of the spindle
: (,,) : : >(< b<>) should change with the increase of the spindle speed
: (,,) : : > Small. The spindle speed does not need to transmit all the power at all levels within the range of
: (,,) : : >~r/, but the output torque of the main
: (,,) : : >shaft unchanged, it is called the constant torque area of the spindle
: (,,) : : > (solid line). In this area, the power that the spindle can transmit
: (,,) : : > decreases as the spindle speed decreases. The dotted line in the figure
: (,,) : : > shows the corresponding constant power area and constant torque area when the spindle motor is overloaded (overload allowed)
: (,,) : : >. The power of the motor when overloaded is
: (,,) : : >, and the maximum output torque overloaded
: (,,) : : > is
: (,,) : : > ． .
> : (,,) : >CNC single-column vertical lathe
: : : >Maximum processing diameter: < b
:b : >
: : : >, maximum workpiece Height: < b
:b : >
: : : >, Maximum workpiece weight < b:
:b : >
: : : >, Workbench diameter: < b
:b : >
: : : >, < b, <> worktable speed series: < b <> level (II gear stepless, stepless), worktable speed range: < b .<>(< b.<>)< br/<>, the maximum torque of the worktable< b<> (< b<>)< b<>b< b<>, the maximum cutting force of the vertical tool holder: < b< >(< b<>)< b<>, horizontal stroke of vertical tool holder: < b~
:b : >
: : : >, vertical stroke of vertical tool holder: < b
:b : >
: : : >, vertical tool post feed range: < b.~
:b : >/
: : : >,
: (, ,) : : >C
> : (,,) : >Single column vertical lathe
: : : >Vertical tool post rapid movement speed:< b
:b : >/< br/> : : : >, beam stroke: < b
:b : >
: : : >, cutter holder cross-section: < b*
:b : >
: : : >, main motor power: < bC<>: < b<> (< bC<>: < b<>) < b<>, electric knife table: < b*
:b : >
: : : >, Machine tool weight (approx.): < b
:b : >
:b : >
: : : >, CNC system:
:b : >
: : : >.
: (,,) : : ><:>