Neoprene latex polymer mortar-Manufacturer in Tongzhou District, Beijing

Manager Cui
1. Product Introduction
Neoprene latex polymer waterproof mortar is made of chloroprene latex waterproof emulsion, special cementitious materials, and high-quality aggregates mixed according to a special process. The mortar has excellent adhesion Anti-crack, anti-freeze, anti-seepage, anti-corrosion, anti-chloride ion penetration, wear-resistant, aging resistance and other properties, suitable for steel structures and steel bars in water conservancy, port engineering, highways, bridges, metallurgy, chemical industry, industrial and civil buildings, etc. Anti-seepage, anti-corrosion protection and repair projects for concrete structures.
2. Scope of use
, concrete reinforcement of building structures, waterproofing and plugging of civil air defense facilities
, reservoir dam, port anti-seepage treatment
, hot water pool, landfill, chemical industry Chemical corrosion-resistant buildings such as warehouses and chemical tanks
, concrete repair of pavements, bridge decks, tunnels, culverts, anti-leakage treatment of industrial and civil building roofs, bathrooms, and basements
, steel structures and reinforced concrete waterproofing
, can be applied directly on wet base surfaces, and has good adhesion with a variety of base materials.
3. Main technical performance
(Executive standards/national industry standards)
Serial number

Test items

Technical indicators (Type I)



Setting time

Initial setting/



Final setting/





Anti-seepage pressure

Mortar/



Mortar/





Compressive strength







Flexural strength







Bonding strength









The setting time item can be changed according to user needs and quarterly changes Make adjustments

4. Introduction to construction
Base surface treatment: Remove the denudation layer of the old concrete surface, rinse it with water, and keep it basically clean and solid.
Mix the latex and dry ingredients in proportion and stir evenly. The mixed mortar should be protected from the sun and wind.
When the paving area is large, mechanical spraying can be used and construction can be divided into sections.
The mortar layer after construction must be maintained for several days.
5. Packaging and storage
This product is packaged in two components.
It should be stored indoors in a dry, ventilated, moisture-proof and rain-proof environment. The shelf life is one month.
Chloroprene latex polymer mortar is non-toxic, odorless, non-radiative, meets environmental protection requirements, and can be stored and transported as general cargo.