Jining Shunyuan is the first choice for DMS250 terrazzo machine

Our factory is a manufacturer specializing in the production of terrazzo machines
in Shandong Province. It has produced terrazzo machines
for many years. It has developed more than 20 types of road construction and maintenance machinery such as pavement terrazzo machines
and they are widely sold to It is used all over the country and is used in the construction of various high-grade highways, and is well received by users.
The price is subject to telephone quotation
Usage of terrazzo machine
Terrazzo machine
It is mainly suitable for polishing marble floor tiles on terrazzo floors.
Features of the two-terrazzo machine
It is used to polish terrazzo and marble floor tiles, and the size of the tiles is controlled within a certain range.
The equipment adopts workstations, multiple groups of grinding heads, automatic conversion of workstations, automatic grinding, feeding, grouping and step-by-step grinding, and can complete all coarse, medium and fine work and polishing at one time.
It is simple and convenient to operate and normally requires only one person to operate, ensuring the loading and unloading of floor tiles, stable performance, safety and reliability.
The surface is smooth and comparable to marble.
The degree of automation is high, and the savings on labor intensity and site costs are obvious.
It meets quality requirements first time and has high production efficiency, which can help the grindstone brick industry achieve two key leaps in production capacity and economic benefits.
Main parameters of three-terrazzo machine
Machine model
Grinding disc diameter
Grinding disc speed
Coarse grinding efficiency
㎡/
㎡/
Grinding disc life
㎡/disc
㎡/disc
Motor power
Four terrazzo machine installation and operation precautions
Operators must wear rubber boots and insulating gloves.
Terrazzo machine
It is advisable to carry out grinding operations when the concrete reaches the design strength.
Before operation, check and confirm that all connecting parts are tight. Use a mallet to tap the grindstone to make a crisp sound without cracks.
Electrical circuits must use weather-resistant insulated four-core flexible wires. The switch should use a push-button switch and be installed on the handle of the stone grinder. Cables should be installed off the ground and should not be dragged on the ground. The cables should be undamaged and well protected and grounded.
The terrazzo machine
The handle must be covered with an insulating tube, and the line must be protected by zero connection. There must be no less than two contacts, and a leakage protector must be installed. The leakage operating current should not be greater than the operating time, and the operating time should be less than.
After turning on the power and water source, press the handle to lift the grinding disc off the ground, and then start the motor. And check to confirm that the rotation direction of the grinding disc is consistent with the direction shown by the arrow. After the operation is normal, slowly lower the grinding disc and start the operation.
During operation, the cooling water used must not be interrupted, and the water consumption should be adjusted so that the working surface does not dry out.
During operation, if the grinding plate is found to be beating or making abnormal noise, the machine should be stopped immediately for maintenance. When shutting down, the grinding disc should be lifted first and then shut down.
After replacing the new grinding stone, it should be ground on the waste water grinding stone floor or the surface of the waste cement product. After the diamond cutting edge is ground out, it can then be put into work on the working surface.
The grinding block must be clamped, and the clamp should be checked frequently to prevent the grinding stone from flying out and injuring people.
After the operation, the power supply should be cut off, the mud in all parts should be cleaned, placed in a dry place, and covered with a rainproof cloth.
Electrical circuit switches, etc. must be installed and repaired by electricians, and other personnel are not allowed to disassemble and connect them at will.
Note: Because this product is a large machine, we generally choose to use logistics, and it usually arrives in 1 day. It may take longer in remote areas. If you need it, please make a reservation in advance to avoid delaying your use. Place an order. We will arrange delivery as soon as possible.
Name Manager Zhao
Mobile phone
Tel
Fax
Address Huangzhuang Industrial Park, East of Jinyu Road, Jining City, Shandong Province