Putty powder mixer | Putty powder production line

The horizontal spiral belt putty powder mixer mixes the materials efficiently and quickly. The inner and outer spiral belts turn the materials over a wide range under the movement of the spiral belt of the mixing shaft. The inner spiral belt moves the materials to both sides, and the outer spiral belt moves the materials from both sides. The lateral inward movement causes the material to be mixed back and forth, while the other part of the material is pushed by the spiral belt and moves axially and radially, thus forming a convection cycle. Due to the stirring of the above-mentioned movements, the materials are quickly and evenly mixed in a short period of time.
Structural features of horizontal putty powder mixer
This machine is a horizontal cylinder with a unique structure of three-layer inner and outer spiral belts. It operates smoothly, is reliable in quality, has low noise, has a long service life, is easy to install, and has multiple functions. A mixer structure, multifunctional mixing equipment with a wide range of uses.
The mixing speed is fast and the mixing uniformity is high, especially for viscosity. A scraper can be installed on the spiral belt, which is more suitable for mixing thick pastes.
Under the mixing requirements of different materials, special materials must be cleaned after each mixing. Different spiral belt structures are used, and the jacket type can be heated and dried.
The horizontal machine body can also be equipped with a movable door for user cleaning.
Application Scope of Horizontal Putty Powder Mixer
The Horizontal Ribbon Putty Powder Mixer has introduced foreign technical data and digested innovative design results by our factory's professional and technical personnel. It is a new type of high-efficiency mixing equipment that is widely applicable It is used in chemical, pharmaceutical, food, compound fertilizer, health care products, dyes, pigments, rubber, building materials, refractory materials, rare earth plastics, glass, and new materials, nuclear energy materials and other industries.
Feilong Machinery, a putty powder production line independently developed and produced, has an annual output of about 20,000 to 30,000 tons. It is mainly controlled by an efficient mixing system, a storage system, a conveying system, a lifting system, a weighing system, a waiting system, a packaging system, a dust removal system, and material level control. System alarm system, air compressor system, complete machine control system, etc.
This putty powder complete production line equipment generally uses three raw material tanks, two of which are large tanks used to hold bulk cement and calcium powder, and the remaining small tanks are used to hold light calcium, heavy calcium sand, small materials, etc. . Bulk cement does not require lifting equipment when entering the tank, but relies on pump trucks. Small materials such as light calcium and heavy calcium sand need to be lifted into small tanks using a bucket elevator. The ingenious material distribution system supports a bucket elevator distribution operation, thereby avoiding waste of resources. The metering system, with the cooperation of the metering screw, introduces the raw materials in the silo into the metering bin, and realizes raw material metering through data feedback from the sensor. The measured materials are led into the main bucket elevator through the screw conveyor and lifted to the upper part of the mixer to be mixed. The warehouse to be mixed is a pneumatic large-opening type, which can quickly put the materials to be mixed into the gravity-free mixer to achieve continuous production of putty powder.
The entire putty powder production line uses a dual-shaft gravity-free mixer with the best mixing effect at present. The mixing speed of the dual-shaft mixer is quite fast. Generally, it can be mixed evenly in minutes, and the production capacity is very high. The finished product mixed in the mixer passes through the pneumatic quick door and is quickly placed in the finished product silo for buffer storage. The finished product silo and the packaging machine enter the packaging machine for measurement and packaging through a soft connection. Users with particularly large output can add a belt conveyor to the rear process of the packaging machine to directly transport the finished product to the finished product area or truck.
This type of automatic batching putty powder production line has a simple design, occupies a small area, requires little investment, and is quick to produce results. It has continuous production and high shift output. The use of a double-shaft paddle gravity-free mixer does not destroy the original state of the material, ensuring that the coefficient of the putty powder will not be reduced due to the shape damage of the insulation raw materials, ensuring the quality of the product. It is suitable for the production of small and medium-sized manufacturers and is equipped with an automatic packaging system, which further demonstrates its superiority.