Hunan Tongyuan Waterproofing supplies GBS waterproof coating

Product Introduction
Tongyuan brand waterproof coating is a new type of environmentally friendly two-component synthetic polymer waterproof coating, which represents the development trend of international waterproof materials. The formed coating film has the dual advantages of high elasticity of organic materials and good durability of inorganic materials, and has outstanding waterproof effect. The service life is more than 10 years. The product is divided into three models. The medium-sized one is specially used for waterproofing and moisture-proofing in parts with relatively small deformation such as pools, basements, kitchens, bathrooms, underground passages, etc. The one is used for waterproofing in parts with large deformation such as exterior walls and roofs, and is specially used for waterproofing parts that require high temperature resistance. , such as bridge deck boiler room, etc.
Product Features
Green building materials, no solvent pollution, non-toxic construction, convenient construction, short construction period, can be directly applied to wet or dry base surfaces of various materials, the coating is hard, high-strength, durable, water-resistant, crack-resistant and has excellent adhesion properties. It has strong bonding ability and can be firmly bonded to the base surface of a variety of materials to form the entire waterproof layer in one go. There are no seams, which reduces the risk of leakage and improves the waterproofing effect.
Scope of application
Can be directly constructed on wet or dry masonry, mortar, concrete, metal, various insulation layers, various waterproof layers such as polyurethane, for new and old applications such as house roofs, basements, exterior walls, kitchens, toilets, tunnels, pools, reservoirs, etc. Can be used on buildings and structures.
Use and construction
When batching, slowly add the powder to the liquid, stirring while adding, until no particles are contained
The packaging in the barrel is a two-component form of liquid and powder. , accurate measurement, ready to use
Use two or more coating construction methods on the treated base surface. The coating direction of the upper and lower layers must be vertical, and ensure that there is no leakage of coating, and the coating film Uniform thickness
Make ingredients once and construct once. The prepared slurry will dry out if left for too long. If the prepared slurry dries up, do not add water and stir for further use.
Keep construction equipment and work clothes clean, and clean construction equipment and work clothes stained with paint in a timely manner.
The coating time interval between each layer shall be based on whether the previous layer is dry and non-stick. Under open-air conditions with a temperature of ℃, it will take about an hour to apply without people and about an hour to apply with people. The temperature at the site is low. When the humidity is high and ventilation is poor, the drying time will be longer, otherwise it will be shorter. For the construction method, the lower layer of non-woven fabric and the middle layer must be constructed continuously without intervals.
No open-air construction on rainy days
Packaging, storage and shelf life
Liquid materials are packaged in barrels, and powder materials are packaged in bags
Should be stored in a ℃ environment and protected from direct sunlight
The powder must be sealed and stored in a dry environment
The shelf life is one year from the date of production.