How to use Shandong aerated blocks

运输交货：

货车

发货日期：

当日

公司网址：

www.sdjqk.com

Air-entrained block is a new lightweight and porous building material with the advantages of light bulk density, high thermal insulation efficiency, good sound absorption and processability. Air-entrained block has been widely used in load-bearing or non-load-bearing structures in industrial and civil buildings in my country. Pipe insulation has become an important part of new building materials. Everyone knows that air-entrained blocks can be made into wall blocks, pressure panels, insulation blocks, floor slabs, wall panels, insulation pipes and other products, but do you know when air-entrained blocks cannot be used?
Today Jinan Longcheng Shengshi Building Materials Co., Ltd., a manufacturer of air-entrained blocks in Jinan, will introduce to you where air-entrained blocks cannot be used in buildings. The aerated block is not suitable for use directly on the floor or the ground, in a high temperature environment above 80 degrees for a long time, or in a strong acid-reducing environment. Therefore, during construction, we must pay attention to the knowledge of using air-entrained blocks to avoid causing wall cracks in the later period.
When the air-entrained blocks are used appropriately, they will have extraordinary effects, including earthquake resistance. The earthquake resistance of air-entrained block buildings is stronger than that of clay brick buildings. Generally, the bulk density of air-entrained concrete is kg/cubic meter, but with a bulk density above kg/cubic meter, its weight is only comparable to ordinary concrete of clay bricks. It is an ideal lightweight material for high-rise buildings, super high-rise buildings and large-space structural buildings. It can reduce the weight of the building within kilograms/cubic meters. Compared with traditional building materials, the weight of air-entrained block buildings is lighter. The light weight of the building can greatly improve the seismic performance of the building, because the earthquake is the product of the mass of the building and the acceleration generated by the earthquake. Obviously, the light weight of the building has a small mass and a small earthquake force.
When using aerated blocks, be sure not to use defective aerated blocks of poor quality. Those with oil stains, loose cracks on the surface, and non-standard shapes with missing edges and corners are considered unqualified aerated blocks. piece. If it cannot be observed directly, you can use a tape measure to measure the length, width and height of the aerated block during spot inspection. The minimum scale is millimeters, the cracked molding and damage depth. Place the steel ruler flat on the surface of the block and use the steel tape measure perpendicular to the steel ruler to measure it. maximum depth.
The air-entrained block must be used with caution and care, and should be constructed in conjunction with the characteristics of the air-entrained block itself. Jinan aerated block factory direct sales, Shandong aerated block factory.