The production of Liaocheng sand aerated blocks needs to be improved

运输交货：

货车

发货日期：

当日

厂家：

http://www.sdjqk.com/

The production process of Liaocheng sand aerated blocks includes six major processes: preparing materials, pouring, resting, cutting, and steaming. Liaocheng sand aerated block ingredients are prepared by measuring various processed materials according to the proportion requirements, and then mixing them in a mixer. This is a key process in the production process of Liaocheng sand aerated block. Liaocheng sand aerated block is a wooden sword The most popular masonry infill building materials in the building materials market increase production while strictly controlling quality.
The production process of Liaocheng sand aerated blocks requires raw materials such as crushed stone or gravel. The particle size should not be larger than millimeters, the needle-shaped flake particles should not be more than the weight, and the dirt and stone powder containing debris should not be more than the weight. The layout of the Liaocheng sand aerated block production plant should consider the rationality of the process flow, strive to be simple, compact, occupy a small area, facilitate transportation, and leave room for expansion. The layout of the column grid should comply with the requirements of the building module system as much as possible. Liaocheng sand aerated blocks require a flat wooden pallet on the working site during production, and the bottom of the wooden pallet must be kept flat and consistent in height.
The vertical layout of the factory building of Liaocheng sand aerated block manufacturer adopts multi-layer or single layer, which is mainly determined according to the process characteristics. The height of each floor is mainly determined by the equipment height, maintenance and installation requirements, and meets the requirements for lighting and ventilation. However, the minimum floor height should not be lower than the floor height and should also meet the requirements of the building module system.
In the production process of Liaocheng sand aerated blocks, the stacking of raw materials, semi-finished products and finished products must be smooth and the transportation between them must be smooth. Strictly control the ratio between the production scale and output of the factory, and cannot produce blindly. We should also pay attention to the production process of concrete blocks, the smooth flow of water sources, power sources, heat sources, transportation and other issues
Maintenance of Liaocheng sand aerated block equipment When the outdoor temperature is ℃℃, natural curing can be carried out after the molding hours. Water curing, rotation and pile curing can be carried out every hour. When the temperature is too low, it can be transferred to the pile for curing after two days, and the curing time is days. Water should be poured every hour on sunny days and at least three times at night to keep the blocks moist. In winter, in addition to watering and maintenance, they must also be covered and insulated to avoid freezing. Handle with care when stacking and stacking to avoid damage. . The various production processes of Liaocheng sand aerated blocks must be connected and kept open in a timely manner. Whether it is the warehouse or the production workshop, good ventilation, dustproof, moistureproof, and corrosionproof must be maintained.
There are many ways to improve the efficiency of the Liaocheng sand aerated block equipment production line. Maintaining the equipment in the production line can increase the service life of the machinery, thereby reducing the manufacturer's expenses. Only excellent product quality can win the trust of consumers. It is crucial to find a professional Liaocheng sand aeration block equipment manufacturer. Welcome new and old customers to visit and serve you wholeheartedly!