Supply 2015 Shanxi DYT electro-hydraulic plow unloader

Overview This product is widely used for segmented unloading of conveyors in mines, metallurgy, electric fields, coal fields, collection stations, ports and terminals. The hydraulic plow unloader is a mechanical product installed on the middle frame of the belt conveyor to perform unloading and control the flow direction of material transportation. It can evenly and continuously unload the transported materials into the hopper or the required place. This unloader adds a variable groove angle auxiliary coulter, etc., and uses an electro-hydraulic push rod as the power source, which overcomes the problem of the old unloader's inability to plow the material, scrape the tape, and poor overload capacity, which often burns out the motor and bends the top wire. Disadvantages such as levers and easy mechanical damage.
Working Principle
The single- and double-sided wear-resistant plow unloader uses an electro-hydraulic push rod as the power source. When working, the drive rod is extended through the push rod to drive the frame forward to complete the drop of the machine head. , and support the flat roller group to make the working surface of the tape straight, and the lower edge of the machine head is closely attached to the tape surface. Write the material on the tape into the bucket and send it to the required place. After the unloading is completed, start the electro-hydraulic pusher The lever retracts the driving rod, driving the frame to retreat, the plow head to lift, and the variable roller group changes from parallel to trough shape to allow materials to pass smoothly.
Explanation
The power source driving part is currently the latest dual-purpose hydraulic electro-hydraulic push rod for flashlights in China. It overcomes the shortcomings of the electric push rod and its poor overload capacity, causing the motor screw to bend and become stuck. It maintains the electric The advantage of the push rod is that it has no leakage and is self-aligning to realize the lifting and lowering of the plowshare by controlling the forward and reverse rotation of the motor.
The plowshare part is divided into a front plowshare made of alloy chromium manganese or asbestos and a rear wear-resistant offset plate to make the discharge cleaner.
The cable tightening device added to the plowshare is a mechanical tensioning type, which can adjust the height of the plowshare. Lifting or shaking prevents the tape from being torn, worn and leaking.
The electro-hydraulic push rod of the driving part has two installation forms. The electro-hydraulic push rod is placed on the upper part of the coal separator and the electro-hydraulic push rod is placed on the left or right side of the coal separator, which greatly facilitates the user.
The flap of the special air-locking funnel for the unloader is made of high-chromium manganese wear-resistant material, which extends the service life to years, reduces the amount of maintenance, reduces the induced blast, and reduces it to below the original level, making the material uniform and preventing running Spread the sticky material all over and spread it along the way.
Contact Ms. Shi
Mobile phone
Tel