Year1
- 型号：
- SRJF-5
- 功率：
- 800W
- 供热面积（㎡）：
- 5-10m2
Heating principle of electric radiant heater
The radiant heating we are talking about does not fill the room with hot air in sequence like convection heating, but heats objects through infrared radiation. Heat is transferred from one warm object to another cooler object. If the temperature difference between the two objects is large, the heat conduction will be faster. The design principle of the infrared radiation electric heater is to simulate the principle of the sun warming the earth. The infrared radiation heat emitted by the infrared radiation electric heater device directly heats the human body, objects, the ground, etc., and then heats it through secondary radiation of human body objects, etc. Air, it is not the traditional convection heating principle. The traditional convection heating principle is to heat the air first, and then conduct the heat to the human body after the air in the entire room is heated. This greatly extends the heating time and reduces the conversion of electric heat energy. rate, wasting our precious energy.
Characteristics of electric radiation heater
First of all, it does no harm to the human body and has the effect of promoting blood circulation. The radiation we are talking about is not electromagnetic wave radiation. Far infrared rays have physical therapy effects on the human body. This has been widely It is used in the field of medical rehabilitation and is called the green light of life by many experts.
No wind, no light, no noise. No wind will not fill the air with a lot of floating dust, which is very beneficial to special types of work in the workshop. Another advantage of no wind is that many factories have reported that they used hot air blowing in the past. The heating methods, such as super-powerful hot air curtains, not only waste electricity, but also have poor heating effect. The wind blown out is cold wind and has no light, which will not cause strong light stimulation to human eyes, especially for workers who use radiation heating for a long time. And office workers are prone to eye diseases if they work under strong light.
Energy Saving Because the heat conversion rate of this product is basically 100%, it effectively utilizes heat energy. Ordinary water heating and floor heating require a preheating period of several hours, which is a huge waste of energy. Far infrared heating systems take several minutes. There will be a warm feeling and the required temperature will be reached within half an hour. Generally, the room will cool down within minutes when the heater or central air conditioner is turned off. However, our product has a heat storage function and can maintain the required temperature within two hours of shutdown.
Easy to install, drop it directly on the roof or ceiling, or hang it diagonally on the wall. No large-scale civil engineering is required to keep the workshop warm throughout the winter. No maintenance is required. As long as the machine cools down, wipe off the dust with a wet rag. That’s it. If the single-chip heater has quality problems, repairing the single-chip heater will not affect the heating of the entire space.
It will not produce open flames and is particularly suitable for installation in spray painting or other workshops where open flames are a concern.
The radiant heaters produced by our company are not restricted by any space. They are convenient for energy supply and simple to install. They are not only suitable for overall heating of large spaces, but also for local heating of large spaces. This not only saves electric energy, but also allows The area requiring heating is effectively heated, killing two birds with one stone. Special equipment for heating yoga classrooms, high-temperature electric heating equipment for yoga classrooms, yoga room heating equipment
WhatsApp
