Year1
- 规格：
- 25千克/桶
It is a two-component paint made by grinding epoxy resin, pigments and organic solvents and adding supporting curing agents.
Characteristics: High gloss, good hardness, good adhesion, chemical resistance, good mechanical properties and salt spray resistance, seawater resistance, solvent resistance and other properties. However, it has poor weather resistance and is not suitable for outdoor use.
Usage: It is suitable for anti-corrosion coating on metal and light metal surfaces, as well as on steel structure surfaces and concrete surfaces.
Technical requirements project indicators
The color of the paint film meets the standards and is within the color difference range
Fineness,,
Solid content
Flexibility
Impact strength,?
Hardness
Drying schedule, hard dry, full cure days
Water resistance, (immersion) Allowed to whiten, recover
Alkali resistance (immersion in solution) No change
/>Construction Reference
The main paint and curing agent are packed in barrels and proportioned as required during construction.
The oil, moisture, dust and other contaminants on the surface of the object to be coated must be thoroughly cleaned and kept clean and dry.
The substrate temperature must be higher than the dew point ℃. When the substrate temperature is lower than ℃, the paint film will not solidify, so it is not suitable for construction.
After thoroughly mixing component A, add component B according to the required proportion and mix thoroughly. After letting it stand for maturation, add an appropriate amount of diluent to adjust to the construction viscosity.
It can be applied by air spray or brush.
The blended paint must be used up inside (℃).
, coating interval
Substrate temperature ℃
Minimum interval
, dry film thickness (recommended)
Transportation and storage
When the product is transported, It should be protected from rain, sunlight and collision, and should comply with the relevant regulations of the transportation department.
The product should be stored in a cool and ventilated place, away from direct sunlight, insulated from fire sources, and in a warehouse away from heat sources.
Safety protection The construction site should have good ventilation facilities. Painters should wear glasses, gloves, masks, etc. to avoid skin contact and inhalation of paint mist. Fireworks are strictly prohibited at the construction site.
WhatsApp
