A-type flange unloader is the first choice for Kejian Environmental Protection

>Precautions for use
Before using the star unloader, check the quantity and type of lubricating oil in the reducer, replace it with new oil after one month of operation, and change the oil once a year thereafter.
. Connect the air source interface, and check whether the interface is blocked by foreign matter. Make sure the interface is clean and smooth.
. Before using the star unloader, be sure that the rotation direction of the rotor is clockwise (from deceleration to deceleration). When the machine extends the shaft end and looks at it, it is consistent with the arrow on the sprocket cover)
Before using the star unloader, open the sprocket cover to check the tension of the chain. During operation, it should be checked regularly and at the same time. Coat the chain and sprocket with appropriate grease
. During the entire use of the unloader, adjust the pressure reducing valve so that the pressure at the seal is greater than the material pressure in the valve body. The gas is oil-free, dry compressed air.
. During the entire use of the star unloader, the air source at the seal always exists. The air source can only be closed after making sure that the valve is out of operation