We supply Shandong Jinan Raymond Mill with reasonable price, reliable performance and widespread users all over the country.

The whole machine structure of Raymond Mill is composed of a host analyzer, pipeline device, blower, crusher, elevator, electromagnetic vibration feeder, electric motor, etc., which can be equipped according to user needs. After the material is crushed to the required particle size, the material is sent to the storage hopper by the elevator, and then the material is evenly and continuously sent into the grinding chamber of the main machine of the Raymond mill through the vibrating feeder. Due to the centrifugal force during rotation, the grinding roller swings outward and is pressed against the grinding mill. The ring blade scoops up the material and sends it between the grinding roller and the grinding ring to achieve the purpose of crushing due to the rolling of the grinding roller. The fine powder after grinding the material is brought into the analysis machine with the circulating air of the blower for sorting. Materials that are too fine and too coarse fall back to be reground. The qualified fine powder then enters the finished product with the air flow into the cyclone powder collector and is discharged through the powder outlet pipe to become the finished product.
In the Raymond mill chamber, because there is a certain amount of moisture in the material to be ground, the hot water vapor evaporates during grinding and the pipe joints of the whole machine are not tight. The outside air is sucked in, which increases the circulating air pressure to ensure that the mill is under negative pressure. The air flow increased by work is discharged into the dust collector through the residual air duct, and is purified and then discharged into the atmosphere. Raymond mill is suitable for grinding and processing of various materials in industries such as barite, calcite, potassium feldspar, talc, marble, limestone, ceramics, glass, etc., with a Mohs hardness of not more than grade 1 and a humidity below 100%. Adjust arbitrarily within the scope of the project.
Structural Characteristics of Raymond Mill
The three-dimensional structure of Raymond Mill occupies a small area and is highly complete. It forms an independent production system from block materials to finished powder.
The finished powder has a uniform fineness and a sieving rate that is difficult to achieve with other grinding equipment.
The main transmission device of the grinding mill adopts a closed gear box and pulley transmission to run smoothly and reliably.
The important components of the Raymond mill are all made of high-quality steel. The wear-resistant parts are all made of high-performance wear-resistant materials. The whole machine has high wear resistance and reliable operation.
The electrical system adopts centralized control, which can basically realize unmanned operation and facilitate maintenance in the grinding workshop.