Supply of industrial dryers in Nanchang, Jiangxi, easy to operate, large processing capacity, energy saving and environmental protection

Working principle of the dryer
The power generated by electricity, diesel power, wind power, flammable materials, etc. is used to heat the ambient air, transport it to the surrounding area, and then reach the appropriate temperature for dehumidification.
The specific process is as follows: the wet material is sent to the hopper by a belt conveyor or bucket elevator, and then enters the feeding end through the feeding pipe through the feeding machine of the hopper. The inclination of the feeding pipe should be greater than the natural inclination of materials to facilitate materials to flow into the dryer smoothly. The dryer cylinder is a rotating cylinder, which is slightly inclined with the horizontal line. Materials are fed in through the higher end, and heat carrier enters through the lower end, and contacts with materials in counter-flow. Sometimes heat carrier and materials flow into the cylinder together. As the cylinder rotates, the materials move to the lower end due to gravity. When the wet materials move forward in the barrel, they receive the heat from the heat carrier directly or indirectly, and the wet materials dry. Then, the wet materials are sent out through the discharge end through a belt conveyor or screw conveyor. The inner wall of the barrel is equipped with a lifting plate, which can lift the materials and scatter them, increases the contact surface of the materials and the airflow, in order to improve the drying rate and forward the materials advancement. Heat carriers are generally divided into hot air, flue gas, etc. After the heat carrier passes through the dryer, a cyclone dust collector is generally required to collect the materials in the gas.
Features of the dryer
High drying intensity. Since the material is highly dispersed in the air flow, the entire surface of the particles is actively used as an effective area for drying.
, short drying time.
The air flow dryer has a simple structure, small footprint, and is easy to build and maintain.
, large processing capacity and high thermal efficiency. Thermal efficiency is achieved when drying unbound water.
The dryer achieves zero horizontal thrust, which greatly reduces the wear of the supporting wheel, and the cylinder runs smoothly and reliably
The dryer adopts an aligning supporting wheel device to ensure the coordination between the supporting wheel and the rolling ring Always linear contact, greatly reducing wear and power loss.