Tacheng talcum powder dryer, putty powder ball mill, dry powder mortar processing equipment

型号：

1.5x16米

The barrel of the talcum powder dryer is equipped with lifting plates and guide plates with different angles and spacings. This structure can ensure that the materials to be dried move along the spiral movement direction under the action of gravity and maintain sufficient residence in the barrel. time and sufficient dispersion, so that the material in the barrel can fully exchange heat with the hot air flow from the combustion chamber, eliminating the problems of small heat exchange area and low evaporation intensity per unit volume caused by wind tunnels that often appear in the cross section of conventional drying equipment. defect. The special talc powder structure makes the inner and middle cylinders surrounded by the outer cylinder to form a self-insulation system. The heat emitted from the surface of the inner and middle cylinders participates in the heat exchange of the materials in the outer layer of the cylinder, and the outer cylinder is in At the low temperature end of the hot air flow, the heat dissipation area and heat energy loss of the cylinder are significantly reduced. The energy-saving talc powder dryer can make full use of waste heat, reduce heat dissipation loss, increase the heat exchange area, and greatly increase the evaporation intensity per unit volume of the dryer, thereby effectively increasing the heat energy utilization rate, reducing energy consumption, and making the talc powder dry. The thermal efficiency of the dryer has been greatly improved.
Due to the special structure of the sleeve dryer, the length of the cylinder is one-third that of the single-cylinder rotary dryer. The basic area is about less than that of the single-cylinder rotary dryer, and the basic investment is reduced accordingly. The talc powder dryer adopts friction transmission between the supporting wheel and the wheel belt, which has low transmission power and reduces the noise when the equipment is working. The sealing system adopts micro-contact technology, which has better sealing effect and reduces dust pollution.
Features of talc powder dryer:
The air outlet temperature of talc powder dryer is low, and the dust removal equipment has a long service life.
The fuel can be adapted to coal, oil and gas. It can bake the following block materials, granular materials and powdery materials.
No need for large and small gear transmission, using supporting wheel transmission.
Talc powder drying equipment requires less investment and can recover costs quickly.
Compared with single-cylinder dryers, it occupies about 10% less space, reduces civil construction investment, and reduces power consumption.
The self-insulation thermal efficiency of the talcum powder dryer cylinder is as high as above (the thermal efficiency of the traditional single-cylinder dryer is only 3), improving the thermal efficiency by 3.
, the desired final moisture index can be easily adjusted according to user requirements.
The talcum powder dryer can ensure the final moisture content of the material is below.