Supply Henan factory direct sales of high-efficiency plate heat exchangers

High-efficiency plate
Heat exchanger
Plate heat exchanger is a heat exchange equipment with high heat transfer efficiency, compact structure and simple maintenance. It has been widely used in heating, air conditioning, water supply and drainage, Metallurgy, chemical, video, petroleum, machinery and other industries have become the first choice for designers and plate heat exchange users. The series of plate heat exchangers consists of a set of corrugated metal plates and sealing pads, compression plates, guide rods, clamping bolt columns and Takeover and other components. The angled plate heat exchanger with four corners on the plate is composed of a set of corrugated metal plates and sealing gaskets, compression plates, guide rods, clamping bolt columns and pipes. There are corner holes at the four corners of the plate for the two fluids for heat transfer to pass through. The metal plate is installed in a frame composed of a fixed plate and a movable compression plate, and is tightened with clamping bolts. Sealing gaskets are installed on the plate to seal the fluid channels and guide the fluid to alternately flow into the respective channels. The corrugated plate not only increases the degree of turbulence, but also forms many support points, which are enough to withstand the pressure difference of the medium. The characteristic of plate heat exchanger is large average temperature difference. It occupies a small area, has a compact structure and is easy to clean. Light weight, the thickness of the plate is average. The heat transfer coefficient is high, and the corrugations of the plates can cause turbulence in the fluid at a smaller flow rate. The heat exchange area or process combination can be changed. The required heat exchange area can be achieved by increasing or decreasing the number of plates. Changing the arrangement of the plates can be applied to different heat exchangers. Price is low.