Supply Henan fully automatic self-cleaning filter

Fully automatic self-cleaning filter Automatic self-cleaning filter Self-cleaning filter
1. Fully automatic self-cleaning filter product overview Filters are an indispensable means of treatment in the water purification process and are used to intercept various impurities in the water. , to purify water quality or protect the normal operation of other equipment in the system. Ordinary mesh filters are widely used in water source filtration, industrial circulating water systems and other fields because of their simple structure, good filtration effect, and low resistance. However, their disadvantages are small dirt holding capacity, easy to be blocked by dirt, and complicated cleaning work. Only by disassembling the equipment can the filter part be cleaned and the status of the filter cannot be monitored. Moreover, it is greatly affected by human factors, making the entire system highly automated. The fully automatic filter can filter raw water and automatically clean and drain the filter element. The system provides uninterrupted water supply during cleaning and draining. Compared with previous filters, this equipment has the advantages of high degree of automation, large processing capacity, self-cleaning and sewage discharge, uninterrupted water supply, and wide application range.
2. Scope of use of fully automatic self-cleaning filter products Fully automatic self-cleaning filters are widely used in circulating or non-circulating cooling water systems, heat exchange systems, central air conditioning systems, central heating systems, hot water boiler systems, etc. They are used to protect cooling equipment, heat exchange devices, air conditioners, boilers, etc. This equipment is suitable for a wide range of industries, including construction, chemical industry, electric power, metallurgy, rubber, papermaking, textile, coal, food and other industries. This equipment requires that the water temperature flowing through the filter should not exceed ℃. The quality of the incoming water requires that the suspended solids in the incoming water should be less than //, and the suspended solids in the incoming water should be allowed to reach // in a short period of time. If the water quality does not meet the requirements, pretreatment needs to be added before the water inlet of the filter.
3. Product functions and characteristics of fully automatic self-cleaning filter
Product functions
The fully automatic self-cleaning filter has the function of filtering raw water and automatically cleaning and draining the filter element. The system provides uninterrupted water supply during sewage discharge. There are two ways to clean the fully automatic filter, automatic control and manual control.
Automatic control Automatic control has two methods: timing and pressure difference. Set the filtration time on the filtration timer. When the filtration time is up, the blowdown is started. The blowdown time is set by the blowdown timer. At the same time, the control system compares the system pressure difference with the pressure difference set by the user in real time. When the system pressure difference When the set pressure difference is reached, the filter is also cleaned and discharged, and the discharge time is set by the discharge timer. When the discharge time is up, cleaning stops and the system returns to its initial state to prepare for the next filtration process.
Manual control Manual control is the best means for system debugging, system working status detection, system troubleshooting and on-demand cleaning and drainage. Turn the manual/automatic selection switch on the operation panel to the manual position to perform manual draining and manual cleaning respectively. Users can choose two control methods according to their needs. For specific operations, see the operation section below.
, Fully automatic self-cleaning filter product features
) The default filtration precision is microns, and can be selected from to microns. The filter area is large and the dirt holding capacity is high. Users can customize it according to actual working conditions.
) The cleaning method is simple, and the cleaning cycle is electronically monitored, which can realize automatic cleaning and sewage discharge. . All parameters in the fully automatic filter control system can be adjusted.
) is equipped with motor overload protection, which can effectively protect the motor.
) It has the characteristics of uninterrupted water supply and no need for bypass during cleaning and sewage discharge, and the cleaning time is short, the water consumption of sewage discharge is small, and the total flow rate is not exceeded.
) Modular structure, strong maintainability, easy installation and disassembly.
) The connection method with user pipelines is flange connection, and the flange adopts national standard flange, which has strong versatility.