Supply Henan manufacturers direct sales of corrugated tube heat exchangers

Corrugated tube heat exchanger High-efficiency corrugated tube heat exchanger Steam-water corrugated tube heat exchanger The corrugated tube heat exchanger produced by our company is different from the existing plain tube heat exchanger and ordinary corrugated tube heat exchanger in that the transmission Heat pipes are shaped differently. Scientific structural design optimizes fluid heat transfer performance.
Product Usage
The corrugated tube heat exchanger is an energy-saving and efficient heat exchange equipment that enhances heat transfer and has been widely used in petroleum, chemical industry, electric power system, heating, etc.
Product Features
The vibrating corrugated tube has no fatigue damage during operation, especially solving the vibration problem in the heat exchange of steam and water.
The compact structure can accommodate more heat exchange tubes per unit volume.
Less fluid resistance blocks internal flow channels and flow dead zones, improving heat transfer capacity.
The tube plate made of stainless steel and carbon steel solves the difficulty of welding the thin-walled corrugated heat exchange tube and the tube plate and extends the service life.
When the fluid with high thermal coefficient enters the corrugated tube and flows through the groove section, the flow rate of the fluid is increased due to the contraction of the turbulent groove, and the flow direction changes at the same time. Water-to-water heat exchange, the heat transfer coefficient can reach ℃.
High temperature and high pressure Although the wall of the corrugated pipe is very thin, it adopts a special molding process and a unique corrugated shape, so that the pressure-bearing force not only does not decrease, but is higher, which can usually be achieved.
Scaleing, corrosion, and clogging of scale and descaling heat exchangers have always been difficult problems to solve, especially when the water quality conditions are poor or the water treatment is not ideal. Since this heat exchanger can produce highly developed turbulence at a very low flow rate, it is difficult to form crystal nuclei of the scale layer and accumulate scaling materials on the tube wall, so the heat exchange tube is not prone to scaling.
Medium types
The heat exchange medium types of corrugated tube heat exchangers include seven media: water, soda, oil, oil, water, furfural water, natural gas water, ammonia mixed gas water, and liquid ammonia water.