Nut conveyor M6

Equipment performance and characteristics
瀹嬩綋
Vibrating hopper
瀹嬩狋
The hopper is equipped with a spiral rising track. When the vibrator below the hopper starts to vibrate, the contents in the hopper The nut then moves forward along the spiral track. The position and shape of the nuts on the track are arbitrary. During the advancement process, the screening mechanism will exclude the nuts that do not meet the requirements one by one. The nuts that finally reach the exit will of course be the ones with the correct direction.
瀹嬩狋
瀹嬩狋
Storage hopper
瀹嬩狋
The storage hopper can store more than 1
瀹嬩狋
Nuts, when the number of nuts in the vibrating hopper becomes less, the detection device will automatically start the vibrator under the storage hopper, and the nuts in the storage hopper will continue to fall into the vibrating hopper until a certain number is reached. , which is very suitable for situations where no one is operating for a certain period of time.
瀹嬩綋
瀹嬩狋
Screening mechanism
瀹嬩狋
Welding nuts usually have a
瀹嬩狋~
convex point, when welding, the bumps on the nut should face the workpiece to be welded, which imposes directional requirements on the nut that is transported to the workpiece. The screening mechanism screens the direction of the nuts. After appropriate adjustment, only the nuts with the correct direction can pass through the screening mechanism, while the nuts with the incorrect direction continue to move forward and return to the hopper.
瀹嬩綋
瀹嬩綋
Storage channel
瀹嬩狋
After the nuts in the correct direction pass through the screening mechanism, they enter the storage channel and line up in sequence. When a certain number is reached, a detection device will send out a signal to cause the motor to stop working. When the number of nuts is not enough, the motor can run automatically to continue to provide the hopper with nuts in the correct direction to the storage channel.
瀹嬩綋
When working, each time it is started, the storage channel will release a nut into the conveying device.
瀹嬩綋
瀹嬩綋
Conveying device
瀹嬩綋
The device is installed on the fixed spot (convex) welding machine through a universal bracket. Its installation angle and position can be adjusted arbitrarily to adapt to workpieces of various shapes. The nuts coming out of the storage channel are sent to the conveying device by compressed air through a flexible hose, and the nuts are quickly ejected by a conveying shaft and accurately delivered to the workpiece.
瀹嬩綋
瀹嬩綋
Control system
瀹嬩綋
All actions during the entire process of the nut being transported to the workpiece are sequentially controlled by the control system , and the time between each action can be adjusted appropriately to meet the special needs of customers. When debugging the equipment, you can use the buttons on the control panel to debug each action individually. You can also use the selector switch to choose whether to link with the fixed spot welding machine or let the fixed spot welding machine work alone.
瀹嬩綋
瀹嬩綋
Efficiency improvement
瀹嬩狋
瀹嬩綋
The use of nut conveyors can increase hundreds of dollars compared with manual small workpieces. Between 30% and 50%, the efficiency of large workpieces can be improved to 100%. The speed depends on the speed of placing the workpieces.
瀹嬩綋