Year1
- 规格：
- 各种规格
Carriage floor characteristics
〈〉 Resistant to chemical attack
〈〉 Glossy, partially transparent or translucent
〈〉 Mostly a good insulator
〈〉 Light weight and strong
〈 〉 Easy to process, can be mass-produced, and cheap
〈〉 Widely used and versatile, easy to color and partially resistant to high temperatures
Can be used to prevent moisture when storing goods
Plastics are also divided into general-purpose plastics and engineering plastics Plastics are mainly defined by their wide range of uses. If they are cheap, they can be produced on many different types of machines. Engineering plastics are more expensive, but their raw material stability and physical properties are much better. Generally speaking, they have both rigidity and toughness characteristics. The transparent carriage floor introduces advanced foreign technology and uses high-grade imported raw and auxiliary materials. A high-strength and highly transparent carriage floor produced. Product colors include white sapphire, tea, coffee and other varieties. The surface of the product is equipped with double-sided transparent molding features. The product has high strength, high transparency, good weather resistance, non-toxic and hygienic physical properties that are better than plexiglass. Purpose: This product is widely used in equipment guard panels, instrument casings, interior drinking water tank liquid level displays, etc.
Characteristics of the carriage floor 2
①Most plastics are lightweight, chemically stable, and will not rust
②Good impact resistance ③Have good transparency and wear resistance ④Insulation Good, low thermal conductivity ⑤ Generally good formability, colorability, low processing cost ⑥ Most plastics have poor heat resistance, large thermal expansion rate, easy to burn ⑦ Poor dimensional stability, easy to deform ⑧ Most plastics have poor low temperature resistance and become brittle at low temperatures ⑨ Easy Aging ⑩ Some plastics are easily soluble in solvents.
Plastics can be divided into two categories: thermosets and thermoplastics. The former cannot be reshaped and used, while the latter can be produced repeatedly.
There are basically two types of plastic polymer structures. The first is a linear structure. Polymer compounds with this structure are called linear polymer compounds. The second is a body structure. High molecular compounds with this structure are called linear polymer compounds. Molecular combinations are called body-type polymer compounds. Some polymers have branched chains, called branched polymers, and have a linear structure. Although some polymers have cross-links between molecules, there are few cross-links, which is called a network structure and is a body structure.
Two different structures show two opposite performances. Because polymers with linear structures (including branched structures) have independent molecules, they have elastic plasticity, can be dissolved in solvents, can be melted when heated, and have low hardness and brittleness. Because there are no independent macromolecules in the body structure polymer, it has no elasticity and plasticity, cannot dissolve and melt, can only swell, and is relatively hard and brittle. Plastics have two kinds of polymer structures. Thermoplastics are made of linear polymers, and thermosetting plastics are made of body-shaped polymers.
Carriage floor
White pure material board is widely used in car floor. It has wear resistance, good self-sliding surface, good low temperature impact resistance and high strength and toughness
Suitable for earthmoving trucks and mine trucks. , the carriage of the coal car is convenient for dumping soiled soil
WhatsApp
