Corn potato starch protein separator

Company name Zhejiang Jinhua Shenzhou Centrifuge Co., Ltd.
Address No. Jinlong Road, Bailongqiao, Wucheng District, Jinhua City, Zhejiang Province
Technical consultation phone number Manager Liu
Office phone number
Email@
Corn potato starch protein separator, wheat starch separator, wheat starch three-phase separation centrifuge
The preferred professional manufacturer is Jinhua Shenzhou Centrifuge Co., Ltd. This product can perform sludge separation process in a fully enclosed and fully automatic manner. Continuous processing process, small floor space, high degree of production automation, low labor intensity and relatively good working environment. It will definitely replace the traditional sludge separation process equipment with high labor intensity and high energy consumption. In the near future, it will also be more widely used in the fields of municipal sludge separation, food protein and starch separation and other fields.
Brand
Shenzhou
Specifications and models

Number
Complete
Unit of measurement
Taiwan
Payment method
Negotiable
Reference price
Negotiable
Price unit
RMB
Supply quantity
No limit
Instructions, quotation manual and driver
No relevant downloads yet
Other information downloads
No relevant downloads yet
Corn and potato starch protein separator
Typical process characteristics
The flour is mixed with water into batter instead of being mixed into dough.
The separation of starch and gluten protein is completed in two stages. Starch and gluten protein are separated using centrifugal separation equipment before the gluten protein forms a network. Then wet gluten and starch and other components are separated by screening method
Wet The purification of gluten uses the screening method
General process flow of centrifugal separation process
Homogenizing starch and protein separation Gluten and starch separation
Starch drying Starch purification Gluten drying
Corn The potato starch protein separator
is mainly composed of a driving drum and a screw propeller. Under the high-speed driving of the motor, the solid particles in the suspension instantly settle to the inner wall of the centrifuge drum and are discharged through the screw propeller. Liquids with different specific gravity, namely water and oil, form two concentric liquid layers due to the different centrifugal forces they receive (water has a large centrifugal force and oil has a small centrifugal force) and are separated through the overflow port. The thickness of the different liquid layers can be adjusted by adjusting the overflow port. The flow weir and variable impeller are changed to achieve three-phase separation of sludge, water and oil. The moisture content and oil content of the dry mud processed by the decanter three-phase separator are very low, and the successful separation at one time reduces the operating cost and the pollution to the environment. It must be pointed out that the moisture content of sludge discharge can be solved by adjusting the diameter of the weir plate. As the diameter of the weir plate increases, the drainage area increases. The higher the drum speed is at the moisture content, the smaller the sludge separation effect will be and the better the separation effect will be. At the same time, the smaller the differential speed between the drum and the spiral is, the lower the moisture content of the discharged sludge is, the higher the solid content of the feed is, and the higher the required difference is.