Leather sludge sewage dehydrator

Company name: Zhejiang Jinhua Shenzhou Centrifuge Co., Ltd. Address: No. Jinlong Road, Bailongqiao, Wucheng District, Jinhua City, Zhejiang Province
Technical consultation phone number: Manager Liu
Leather treatment sludge wastewater dehydrator
Tannery sludge wastewater treatment equipment Working principle of leather wastewater treatment equipment:
The suspension enters the drum from the spiral outlet through the feed pipe. Under the action of centrifugal force generated by high-speed rotation, solid particles with larger specific gravity are deposited. On the inner wall of the drum, the spiral blades that move relative to the drum continuously scrape off the solid particles deposited on the inner wall of the drum and push them out of the slag discharge port. The separated clear liquid overflows out of the drum through the opening of the liquid layer regulating plate. The relative motion between the spiral body and the drum (that is, differential rotation) is realized through the differential, and its size is controlled by the auxiliary motor, thereby realizing the continuous separation process of materials by the centrifuge
Product Parameters :
Model:,,
Use: Mud dehydration
Material: carbon steel or stainless steel
Rotational speed):
Power ():
Outline dimensions () :**
Volume():
Weight():
Product brand: Shenzhou
Leather treatment sludge wastewater dehydrator
Process:
, sewage The sludge in the mud tank is transported to the metering tank through the sludge transfer pump. The amount of mud is adjusted by adjusting the liquid level adjustment tube in the metering tank. The excess sludge flows back to the sludge tank through the return pipe.
In the flocculation mixing tank, the sludge and flocculant are fully mixed by the mixer to form alum flowers. The ideal diameter of alum flowers is about 100%.
Alum flowers are concentrated by gravity in the concentration section, and a large amount of filtrate is discharged from the filter slits in the concentration section.
The concentrated sludge continues to push forward along the direction of rotation of the spiral axis, and is fully dehydrated under the internal pressure formed by the back pressure plate.
The dehydrated mud cake is discharged from the gap formed by the back pressure plate and the spiral body. The sludge treatment capacity and the moisture content of the mud cake can be adjusted by adjusting the rotation speed of the screw shaft and the gap of the back pressure plate.
Leather treatment sludge wastewater dehydrator
Equipment advantages:
.Large processing capacity, long wear-resistant service life, reasonable structure, low noise, small footprint, wide application range, simple operation, It has convenient maintenance, high degree of automation, smooth operation, low equipment cost and low infrastructure cost.
.High-strength mechanical properties and super anti-corrosion capabilities, the main part is guaranteed for eight years, the processing capacity is more than twice that of ordinary models, and the moisture content of the mud is more than % smaller than that of ordinary models.
.The operation process is simple and can be operated by one person. No cleaning is required.
It is easy to install and maintain.
. Strong craftsmanship: The centrifuge adopts a dual-motor dual-frequency energy feedback differential rotational speed system, which can perform flexible stepless adjustment and online intelligent control of the differential rotational speed, and can adjust the differential rotational speed at any time according to changes in materials.
.Complete safety protection devices: torque protection, power control, vibration and temperature measurement and other multiple protections
.Beautiful appearance