Year1
- 底盘型号：
- SX1140GP4
- 发动机型号：
- YC4D130-41
- 排放标准：
- GB17691-2005国Ⅳ,GB3847-2005
!
! The chassis is equipped with Yuchai (intercooled and supercharged)/speed belt pair, ton rear axle, and dragon tires. Wheelbase
! The upper body is equipped with domestic Shijiazhuang Ouke reducer, Hefei Changyuan gear pump, and Zhenjiang Dali motor.
! Imported parts Interpap pumps and motors, Keyi reducers
! Car purchase phone number
! Domestic Zhongtong mixer truck concrete mixer truck, a special truck used to transport concrete for construction. Due to its appearance, it is also often called a snail car. This type of truck is equipped with a cylindrical mixing drum to carry the mixed concrete. During transportation, the mixing drum will always be kept rotating to ensure that the concrete carried will not solidify. After transporting the concrete, the inside of the mixing drum is usually flushed with water to prevent the hardened concrete from taking up space and reducing the volume of the mixing drum.
The mixer truck consists of a second-class chassis, transmission system, hydraulic system, rack, mixing tank, feeding and discharging device, water supply system, control system, ladder and other parts. The front end of the mixing tank is connected to the reducer and installed on the front stage of the rack, and the rear end is supported by two supporting wheels installed on the backstage of the rack through the raceway.
Cleaning
Since concrete will solidify into hard blocks in a short period of time and is corrosive to steel and paint, every time you use a concrete storage tank, clean the adhesive on the concrete storage tank and in and out. The concrete on the material opening is a work that must be carried out carefully every day. These include
Rinse the feed port with water before loading to keep the feed port moist during loading
Fill the cleaning water tank that comes with the vehicle with water while loading
Rinse the feed port after discharging and clean the remaining concrete near the feed port
After unloading at the construction site, rinse the discharge trough, and then add cleaning water to the concrete storage tank to keep the concrete storage tank in the forward direction when the vehicle returns. Rotate slowly
Remember to drain the sewage in the concrete storage tank before loading
Thoroughly clean the concrete storage tank and around the inlet and outlet at the end of the day to ensure that there is no cement or concrete agglomeration.
As long as the above work is not carried out seriously once, it will cause a lot of trouble in future work.
Maintenance
After-sales maintenance of concrete mixer truck
A reasonable determination of the maintenance period. Car maintenance cycle refers to the distance or time for car maintenance. During actual use, car owners should refer to the maintenance cycle recommended by the automobile manufacturer and make appropriate adjustments to the maintenance cycle based on the car's own technical conditions and operating conditions. Generally speaking, when a new car is used under good road conditions, it does not need to be maintained too frequently. The maintenance period specified by the manufacturer can be used as the upper limit. If the technical condition of the car is poor, or the use conditions are harsh, the maintenance period should be shortened appropriately.
Er abundant application free testing. The free inspection activities carried out by concrete mixer truck manufacturers are very beneficial to car owners. Car owners can use these inspection activities to conduct a detailed physical examination of their favorite vehicles, discover and eliminate some potential faults in a timely manner, and thus avoid costly repairs that may occur in the future. Protection costs.
Sanjin can repair assemblies with less crashes. Many concrete mixer truck owners have this feeling. They like that a certain assembly of the truck gets out of control after it breaks down for repairs, causing the vehicle to enter the maintenance period prematurely. The reasons for this phenomenon mainly involve the repairman's assembly skills and the quality of accessories. Therefore, it is best to prevent the breakdown of the assembly and use various advanced technical maintenance equipment and methods to carry out disassembly-free maintenance of the car to avoid unnecessary damage to the car assembly and components, improve the quality of maintenance, and thereby reduce maintenance Total cost.
Small mixer trucks can be widely used in the construction of mines, tunnels, rural towns, highways, water conservancy projects, final short-term small projects, micro mixing stations, subway, national defense and other large-scale projects. The limited width and length have personalized design features such as a narrow body, a short wheelbase, a small turning radius, strong flexibility, and high efficiency.
Car Purchase Process
We will sincerely provide you with better, faster and better services!
The first step is to negotiate the car purchase
Negotiate the vehicle model, price and related requirements by phone or on-site inspection.
The second step is to sign the contract
Both parties sign the vehicle purchase and sale contract and pay the contract deposit in advance (the contract can be signed by fax and signed in person).
The third step is to arrange production
Our company arranges workshop production according to the contract requirements.
The fourth step is to deliver the vehicle
The vehicle is delivered and accepted, the balance of the vehicle is paid, and relevant procedures are completed.
For the delivery method, customers can pick up the vehicle themselves, or they can negotiate for our company to arrange the delivery of the vehicle and negotiate the relevant fees. For more detailed car ordering procedures, please call us
WhatsApp
