8 square Dongfeng flat head sewage suction truck

The Dongfeng square flat-head sewage suction truck professionally designed and produced by XCMG Chusheng (Hubei) Special Purpose Vehicle Manufacturing Co., Ltd. is a new type of sanitation vehicle that collects, cleans and transports sludge and sewage to avoid secondary pollution. The sewage suction truck can automatically It has suction and self-discharge, fast working speed, large capacity, and easy transportation. It is suitable for collecting and transporting liquid substances such as feces, mud, crude oil, etc. The sewage suction truck adopts the domestic technology-leading sewage suction truck vacuum pump, which has large suction power and long suction range. It is especially suitable for suction, transportation and discharge of sludge in the sewer, especially for suction. Sewer mud, silt, gravel, bricks and other larger objects. Sewage suction trucks are mainly used to clean urban sewers, pipe sediments, and clear mud ditches in dead corners. They can also be used to clean industrial drainage pipes, walls, etc., and can also be used for sprinkling, transporting water, and flushing roads. They can also be used for fire fighting in emergencies. .
The suction operation of Fangdongfeng sewage suction truck is as follows
⑴
The sewage suction hose is sucked into the sewage liquid as deep as possible to ensure that the pipe end is always away from the liquid surface during the operation
the following.
⑵
Push the handle of the four-way valve until it is perpendicular to the ground.
⑶
Put the transmission into neutral, then start the engine, disengage the clutch, pull the power take-off switch back to put the power take-off into gear, and the vacuum pump starts running.
⑷Open the tool box in the cab, pull out the buzzer switch, and turn on its power supply.
⑸The operator can pass the observation mirror on the top of the rear head. When the liquid level reaches the middle of the observation mirror, the driver should be notified, and colleagues should quickly pull the sewage suction hose off the ground or close the four-way valve. Under normal circumstances, the buzzer will emit an audible and visual signal at this time. When the driver receives the signal, he should reduce the throttle, push the power take-off switch forward and out of gear, the vacuum pump will stop rotating, and press the buzzer switch to cut off its power supply. .
⑹ Close the fuel tank straight-through cock handle plate parallel to the axis of the inlet mailbox.
⑺After flushing the hose, put it back into the walking platform box, close the side door, and keep the boom facing above the cab.
⑻Close the anti-overflow valve and make its handle perpendicular to the road axis.
⑼ Drive the Dongfeng sewage suction truck away from the operation site.