Dongfeng Dolica 6-7 tons sprinkler truck

Sprinkler Truck
Sprinkler Truck is also called Sprinkler Truck, Multi-functional Sprinkler Truck, Landscaping Sprinkler Truck, Water Tank Truck, Water Transport Truck. Sprinklers are suitable for washing various road surfaces, greening trees and lawns, construction of roads, factories and mines, and washing high-altitude buildings. It has the functions of water spraying, dust suppression, high and low position spraying, pesticide spraying, guardrail washing, etc. It also has the functions of water transportation and drainage, emergency firefighting, etc. It can also be used for temporary emergency fire sprinklers
Each sprinkler truck is equipped with a dedicated fire-fighting interface.

The engine drives the gearbox, and the power take-off installed on the gearbox drives the sprinkler pump. The sprinkler pump generates the main power to spray the liquid inside the tank through the pipe network. Self-priming height
, sprinkling width
, maximum range
can be adjusted to a columnar shape, the shooting range
can also be adjusted to a mist shape, the shooting range
.
Spraying in the front and back, the front is equipped with a duck-shaped nozzle or a round head nozzle, the rear is equipped with a cylindrical open sprinkler nozzle or a shower head nozzle, and there is a working platform at the rear equipped with a high-pressure water cannon. An optional spray nozzle can also be installed at the rear, which is generally used to wash down streets.

Function description
Water absorption operation

The sprinkler truck should be as close as possible to the operation point and park.

Open the side door of the walking platform box, take out the water-absorbing hose, and swing it backward without bending.


Pump the suction hose into the water as deep as possible, ensuring that the end of the pipe is always below the liquid level
during the operation.


Push the handle of the four-way valve until it is perpendicular to the ground.


Put the transmission into neutral, then start the engine, disengage the clutch, pull the power take-off switch back to put the power take-off into gear, and the pump starts running.

The operator can pass the observation glass on the upper part of the rear head. When the liquid level reaches the middle of the observation glass, the driver should be notified, and colleagues should quickly pull the water suction hose away from the water or close the four-way valve.

After putting away the hose, put it back into the walking box and close the side door.

Drive the sprinkler truck away from the pumping location

Spraying operation

Pull the rear handle of the four-way valve parallel to the ground, and open the valve you want to spray. The ball valve moves forward and then sprays the side spray shower, then starts the engine, puts the transmission into gear, pulls the power take-off switch back to put the power take-off into gear, then releases the clutch, the pump starts running, and starts sprinkling water

After the water in the tank is sprinkled, the driver should push the power take-off control handle forward in time to disengage the gear and stop the sprinkler pump.

Tank production
The automatic assembly line tank production process is divided into domestic advanced production processes such as blanking, splicing, automatic welding, head spinning, and one-time roll forming of the tank body. The tank material is mostly produced from high-quality carbon steel plates. For special purposes, stainless steel can also be used according to customer needs. The volume of the tank is
cubic
cubic
cubic
cubic
cubic
cubic
cubic, etc.
Pipeline system
It consists of a four-position three-way ball valve, a straight-through ball valve, a filter outlet, a forward flushing, a rear spraying, a side spraying, a working platform behind a high side shower, and a green sprinkler and anti-aircraft gun.
Operating System
The engine drives the gearbox. The power take-off installed on the gearbox drives the sprinkler pump. The sprinkler pump generates power to spray the liquid inside the tank through the pipe network. Working range: self-priming height
, sprinkling width
, maximum range
can be adjusted to columnar shape, shooting range
can also be adjusted to mist shape, shooting range
.
Sprinkler pump
Equipped with a sprinkler truck, greening spray truck, high-power special sprinkler pump, Veylong pump with fire joint, self-flow valve, and self-priming function.
Optional configuration can be added with advanced facilities such as anti-corrosion, anti-rust, anti-rust, multi-directional water inlet and outlet joints, solenoid valves, pneumatic valves and other advanced facilities in the tank to meet the needs of different users.