LHE type electric hoist double girder bridge crane

Type electric hoist double-girder bridge crane
Lifting capacity
Lifting height
Working level
Type electric hoist double-girder bridge crane is manufactured according to standards/designs and is consistent with the type It is used in conjunction with fixed electric hoists such as chain hoists. The double-rail trolley runs on the track laid by the main beam. This type of crane is very similar to the type crane because the mechanism has two small frames. So named type. The main beam and the end beam are connected with detachable bolts. The bridge frame is a box beam welded by steel plates. The trolley is composed of electric hoist wheels and a support frame. The double hoist is suitable for lifting long objects. The large and small trolley operating mechanism adopts three It is composed of a single rotation mode and is low in price. It is a new type of bridge crane. The working environment temperature of this crane is ℃℃. The lifting capacity is, the span is, the lifting height is, and the working level is. This series of products has two modes: cab control and ground control. A remote control device can be installed to facilitate user selection. This product is a general-purpose crane, mostly used in machinery manufacturing and assembly warehouses and other places where the frequency of application is low or the number of lifting times of the rated lifting capacity is small.
●Cart operating mechanism
The cart operating mechanism uses a three-in-one reducer, which is connected in a set. The wheel axle is the output shaft of the reducer, and the wheel axle is connected to the output gear of the reducer through splines, and then The three-in-one drive unit is connected to the end beam via a torsion support. The entire driving device of the cart is located at the end of the end beam and has no direct connection with the walking platform. During the operation of the cart, it is not affected by the vibration of the walking platform.
●Transmission system
In the three-in-one operation group, the reducer is a fully enclosed shaft-mounted type with ground hard tooth surfaces. The conical rotor squirrel cage motor has a variable top speed ratio, all with cone disks. Brakes and wheels are made of high-strength ductile iron, which has the advantages of good contact strength and wear resistance. When the auxiliary hook needs to be controlled by the driver's cab and the crane runs at a high speed, the electric hoist on the trolley is arranged vertically with the main beam to reduce the swing of the load.
Performance characteristics
●The whole machine has a novel structure and beautiful appearance
●It is light in weight and small in size
●Good in grouping, economical and practical
●Easy to install, use, maintain and transport
●Small size, low wheel pressure
●Smooth operation and wide range of accessories
●Double electric hoist configuration, can participate in hoisting operations at the same time, high work efficiency
●Good stability Make full use of the workshop clearance height to achieve a higher effective lifting height at an affordable price.
Ordering Instructions
Before ordering, the following main parameters of the crane should be determined: lifting weight, span, lifting height, working system, track length, etc.
Listed as lifting weight, span lifting height.
When users have different or special requirements for this series of cranes, they can be negotiated separately and designed separately.
Crane manufacturing standards
● General bridge crane
●Weldment seam breakage standards
● Crane design specifications
●/Electric hoist gantry lifting
/> ● Safety signs, safety colors, etc.
● Safety regulations for lifting machinery
● Crane test specifications and procedures
● Steel wire ropes
●General technical conditions for industrial machinery and electrical equipment
● Safety distance for mechanical protection
● General principles for safety and health requirements in the production process
● Noise standards at industrial enterprise boundaries
● General principles for safety and hygiene design of production equipment
● Safety requirements for electric light sources
/> Crane material standards
● Technical conditions of high-quality carbon structural steel
● Carbon structural steel
● Gray iron castings
● High-quality steel wire
● Electric hoist bridge Type crane
● Crane electronic control equipment
● Radiography and quality grading of steel fusion welded butt joints
● Steel weld and ultrasonic flaw detection methods and grading of flaw detection results
● Round strands Steel wire rope
● Low alloy structure
● Cast carbon steel parts for general engineering
Scope of application
This product is suitable for operation, assembly and maintenance of mechanical processing workshops, metallurgical plants, auxiliary workshops, warehouses, stockyards, power stations, etc. It can also replace ordinary double-girder bridge cranes for loading and unloading operations and is used in production workshops of the light textile industry and video industry.
Model electric hoist double-girder bridge crane
Lifting capacity
Lifting height
Working level
Model electric hoist double-girder bridge crane is manufactured according to standards/designs , used in conjunction with fixed electric hoists such as type chain hoists, double-main girder structure bridge cranes with double-track trolleys running on the tracks laid by the main beams. This type of crane is very similar to type-type cranes because the mechanism has two So it is named a small frame. The main beam and the end beam are connected with detachable bolts. The bridge frame is a box beam welded by steel plates. The trolley is composed of electric hoist wheels and a support frame. The double hoist is suitable for lifting long objects. The large and small trolley operating mechanism adopts three It is composed of a single rotation mode and is low in price. It is a new type of bridge crane. The working environment temperature of this crane is ℃℃. The lifting capacity is, the span is, the lifting height is, and the working level is. This series of products has two modes: cab control and ground control. A remote control device can be installed to facilitate user selection. This product is a general-purpose crane, mostly used in machinery manufacturing and assembly warehouses and other places where the frequency of application is low or the number of lifting times of the rated lifting capacity is small.
●Cart operating mechanism
The cart operating mechanism uses a three-in-one reducer, which is connected in a set. The wheel axle is the output shaft of the reducer, and the wheel axle is connected to the output gear of the reducer through splines, and then The three-in-one drive unit is connected to the end beam via a torsion support. The entire driving device of the cart is located at the end of the end beam and has no direct connection with the walking platform. During the operation of the cart, it is not affected by the vibration of the walking platform.
●Transmission system
In the three-in-one operation group, the reducer is a fully enclosed shaft-mounted type with ground hard tooth surfaces. The conical rotor squirrel cage motor has a variable top speed ratio, all with cone disks. Brakes and wheels are made of high-strength ductile iron, which has the advantages of good contact strength and wear resistance. When the auxiliary hook needs to be controlled by the driver's cab and the crane runs at a high speed, the electric hoist on the trolley is arranged vertically with the main beam to reduce the swing of the load.
Performance characteristics
●The whole machine has a novel structure and beautiful appearance
●It is light in weight and small in size
●Good in grouping, economical and practical
●Easy to install, use, maintain and transport
> ●Small size, low wheel pressure
●Smooth operation and wide range of accessories
●Double electric hoist configuration, can participate in hoisting operations at the same time, high work efficiency
●Good stability Make full use of the workshop clearance height to achieve a higher effective lifting height at an affordable price.
Ordering Instructions
Before ordering, the following main parameters of the crane should be determined: lifting weight, span, lifting height, working system, track length, etc.
Listed as lifting weight, span lifting height.
When users have different or special requirements for this series of cranes, they can be negotiated separately and designed separately.
Crane manufacturing standards
● General bridge crane
●Weldment seam breakage standards
● Crane design specifications
●/Electric hoist gantry lifting
/> ● Safety signs, safety colors, etc.
● Safety regulations for lifting machinery
● Crane test specifications and procedures
● Steel wire ropes
●General technical conditions for industrial machinery and electrical equipment
● Safety distance for mechanical protection
● General principles for safety and health requirements in the production process
● Noise standards at industrial enterprise boundaries
● General principles for safety and hygiene design of production equipment
● Safety requirements for electric light sources
/> Crane material standards
● Technical conditions of high-quality carbon structural steel
● Carbon structural steel
● Gray iron castings
● High-quality steel wire
● Electric hoist bridge Type crane
● Crane electronic control equipment
● Radiography and quality grading of steel fusion welded butt joints
● Steel weld and ultrasonic flaw detection methods and grading of flaw detection results
● Round strands Steel wire rope
● Low alloy structure
● Cast carbon steel parts for general engineering
Scope of application
This product is suitable for operation, assembly and maintenance of mechanical processing workshops, metallurgical plants, auxiliary workshops, warehouses, stockyards, power stations, etc. It can also replace ordinary double-girder bridge cranes for loading and unloading operations and is used in production workshops of the light textile industry and video industry.
Contact Qin Chao
Position Sales Manager
Telephone
Mobile phone
Address Shuangqiao Xiongfeng Industrial Park, Dianbu Town, Feidong County, Hefei City, Anhui Province