TEDA is the first choice for high-quality coal bunker linings

密度：

0.93

Coal bunker lining has many excellent properties. However, few people know about the existence of such an excellent engineering plastic. This is mainly due to the lack of previous research on the melt properties of ultra-high molecular weight polyethylene and the processing methods are basically still there. On the backward pressing-sintering process. In recent years, with the continuous development of ultra-high molecular weight polyethylene processing technology, its products have been successfully used in many fields. Correct usage
The ambient temperature of use should generally not be greater than ℃.
During operation, it is necessary to always keep the material pile in the warehouse at the material entering and dropping point, and always keep the material storage volume in the warehouse at more than half of the entire warehouse capacity.
The resting time of materials in the warehouse should not exceed 1 hour. For materials with moisture content less than 1 hour, the resting time can be appropriately extended.
When the temperature is low, please pay attention to the rest time of the material in the warehouse to avoid freezing blocks.
It is strictly forbidden for materials to directly impact polymer wear-resistant materials.
Do not use external force to damage its structure or loosen fasteners at will.
The hardness particles of various materials are different. Materials and flow rates must not be changed at will. If changes are needed, they must not be greater than the original design capacity. Changing materials or flow rates at will will affect the service life of the liner.
When using polymer wear-resistant materials for the first time, wait until the material in the bin is stored to two-thirds of the entire bin capacity before unloading.