Enamel reaction tank manufacturer

The enamel reaction tank manufacturer's main business is enamel reaction tanks. Today, the enamel reaction tank manufacturer will introduce to you the operating steps of the enamel reaction tank. The enamel reaction tank must follow correct operating methods and basic maintenance methods, which is beneficial to the safety and prolongation of the equipment. service life. The following introduces some basic operating procedures
Before using the enamel reaction tank, first carefully check the pipelines and valves related to the reactor, and only feed materials can be added after ensuring that the feeding conditions are met.
Check whether the mechanical seal of the mixing motor of the reducer is normal, whether the oil level of the reducer is appropriate, and whether the cooling water for the mechanical seal is supplied normally.
After ensuring that there are no abnormalities, start stirring and add materials in the specified amount. Reaction kettles larger than cubic meters or reactors with bottom bearings for stirring are strictly prohibited from empty operation. Make sure that the bottom bearings are immersed under the liquid surface before stirring can be started.
It is necessary to strictly implement the process operating procedures, pay close attention to the temperature and pressure inside the reactor and the pressure of the reactor jacket, and prohibit over-temperature and over-pressure.
During the response process, patrol inspections should be carried out, and problems found should be dealt with in a timely manner.
If over-temperature occurs, cool down immediately with water. The temperature after cooling should meet the process requirements.
If overpressure occurs, the vent valve should be opened immediately. Emergency pressure relief.
Stopping If a power outage causes a shutdown, the feeding should be stopped. If there is a power outage during feeding, the feeding should be stopped, the vent valve should be opened, and the water should be cooled down. During long-term parking, the remaining liquid in the kettle should be cleaned, and the bottom valve, feed valve, steam inlet valve, discharge valve, etc. should be closed.
The above are the enamel reaction tank operating steps introduced by the enamel reaction tank manufacturer. I hope it can bring you some help. Thank you for your knowledge of this website. If you have any questions, please feel free to contact us.