Unconstrained ripple compensation factory direct sales

Yipin Structural Features Unconstrained is named after the previous axial type corrugated compensator had many constraints on its use. The unconstrained corrugated compensator completely eliminates the requirements for guide brackets and guide brackets of the previous axial type compensator. The use of unconstrained corrugated compensator All brackets restraining the corrugated compensator pipe can be spaced at any desired distance.
Produced by the No. 2 factory, pressure levelbr/> Three-connection flange connection type pipe connection
Four-pin axial compensation amount
The unconstrained compensator not only has columnar stability; Self-guiding capability, complete elimination of constraints, overcoming installation errors, small size, safety and reliability. The determination of the distance between the fixed brackets and the calculation of the fixed support thrust of the unconstrained compensator are exactly the same as those of the ordinary axial type compensator. In addition to eliminating the pre-stretching work, the unconstrained expansion joint also greatly relaxes the installation requirements. The unconstrained expansion joint can be installed in the pipeline like a short section of pipe. There is no need to follow the method usually required by other axial expansion joints to connect the entire steel pipe and then cut off the same length of pipe as the expansion joint. Also due to the unrestrained expansion of the sturdy shell, transportation, installation and insulation are also facilitated.
Characteristics of Unconstrained Corrugated Expansion Joint
The determination of the distance between fixed brackets and the calculation of the fixed support thrust of the Unconstrained Corrugated Expansion Joint are exactly the same as those of ordinary axial compensators. In order to make the project stable and reliable, in addition to being installed close to the fixed bracket, the unconstrained corrugated expansion joint also requires three guide brackets within the distance between each fixed bracket.
The unconstrained compensator can be used for overhead trench laying of pipelines, or for directly buried laying with compensation. In this case, an inspection well or dark room should be installed at the unconstrained compensator.
Unconstrained corrugated expansion joints are used for axial compensation of pipelines. They have large compensation amounts, strong self-guiding and super bending resistance, which can simplify the design of pipeline guide brackets and enable the installation of guide brackets at any distance. Adjust as desired.