Pure natural wood wax oil

桶：

2.5L，18L

Sunsheng Pure Natural Wood Wax Oil Product Introduction from Sangge Wood Paint Sales Department
Presents the natural texture of wood, just like naturally occurring
Breathable, good permeability, strong adhesion
Antistatic, harmful to human body and home appliances Harmless, and can prevent fine dust, aging and wear resistance
Anti-UV, waterproof, moisture-proof, anti-fouling, good recoatability, very convenient to use
Suitable for indoor furniture, wooden doors, windows, wooden ceilings, wooden walls, kitchen furniture, etc.
Instructions for use
Process at temperatures above ℃
Need to be diluted, please stir the wood wax oil thoroughly before use
Polish the wood with fine sandpaper and clean it
The maximum moisture content of wood must not exceed
Before applying wood wax oil, the surface of the wood must be sanded with fine sandpaper and wiped with cotton cloth until the surface is smooth. Use sandpaper purpose
Use a soft brown bristle brush when applying. When applying, apply it evenly and thinly along the direction of the wood grain
After the surface is dry, lightly polish the surface of the object to be coated and wipe it clean. You can apply or wipe Second time. When sanding a waxed surface, be careful not to wear through the coating. Use sandpaper with a mesh or above
Before applying, wet the dust-free cloth evenly and squeeze out part of the excess paint liquid. Use even force when applying. Do not use too much or too little force. First, follow the surface of the object. Rub horizontally and vertically alternately several times, and finally rub evenly in the direction of the wood grain to make the paint fully penetrate into the wood grain, and let it dry. After the surface is completely dry, gently polish and wipe the surface of the object to be coated, and perform the same steps as above. When using sandpaper with a mesh or above, the amount of work required is only about one-third of that of ordinary paint.
The drying time is at ℃ and moderate air humidity. It will be dry to the surface after brushing for about 10 minutes. It can be recoated after an hour. It will be dry after about 1 hour. It will be dry to the surface after about 15 minutes. It can be recoated after 1 hour and it will be dry after 1 hour.
If you need samples or further information, please contact me. Thank you again for your attention!