Year1
- 桶：
- 2.5L，18L
Product introduction In order to protect the environment and human health to the greatest extent, we use safe renewable natural raw materials and non-toxic mineral pigments, and use pure natural plant diluents to formulate it. Nontoxic, no harmful odor, high performance products that meet your needs.
Product introduction Weather-resistant wood oil formulated from natural raw materials has strong ability to adapt to climate change, excellent penetration and adhesion. The protective coating formed on the wood surface is particularly resistant to ultraviolet radiation in the sun. , effectively prevent wood from cracking and deformation, and can highlight the material beauty of wood. Helping you comprehensively solve the durability problem of outdoor wood, making the wood more resistant to UV rays, waterproof, moisture-proof and mildew-proof!
The scope of use is especially suitable for outdoor wood, such as outdoor anti-corrosion wood for garden projects. If you want to further build a protective layer on the surface of said wood, you can use a water-based outdoor wood paint. Ingredients: Binder: special tung oil, modified rosin, etc.
Auxiliary materials Lead-free desiccant.
Colorless, transparent and various colors.
The viscosity is about 2 seconds (standard millimeter beaker).
Flash point approx.
The construction method can be brushing, spraying, dipping and rolling. The six-sided painting effect is better.
Processing must be carried out at a temperature above ℃ without dilution. Stir thoroughly before use. Polish the wood with fine sandpaper and clean it. First apply a thick layer on the surface of the wood, and apply an even and full layer along the grain direction. Wood oil, after about ten minutes, wipe off the unabsorbed oil with a rag and apply a thin layer of wood oil. After it dries, you can directly apply a second layer of wood oil without sanding.
Theoretical dosage: One liter of the first coating can be used in square meters. The second coating can be used in square meters per liter.
Drying time: ℃, medium air humidity, no more than 1 hour to tack dry. After 1 hour of hard drying, a second layer of wood oil can be applied. Actual drying times will vary with temperature and humidity, and recoating times will vary accordingly.
The validity period is at least one year without opening.
Product Disposal Do not pour remaining wood oil into wastewater. Once completely dry, this product can be disposed of as household waste. Completely empty cans can be recycled and reused.
If you need samples or further information, please contact me. Thank you again for your attention!
WhatsApp
