Circulating pump oil temperature machine, circulating pump water temperature machine, circulating pump temperature control equipment

< r# Circulation pump oil temperature machine, circulation pump water temperature machine, circulation pump temperature control equipment
< r# The circulation pump transports the heat transfer medium from the heating device equipped with a built-in heater to the mold, and then returns from the mold In the heating device, the temperature sensor measures the temperature of the heat transfer medium and transmits the data to the microcomputer controller. The controller adjusts the temperature of the heat transfer medium, thereby indirectly adjusting the temperature of the mold. If during production, the temperature of the mold exceeds the temperature of the controller. When the temperature is set, the controller will open the solenoid valve and connect the water inlet pipe until the temperature of the heat transfer medium, that is, the temperature of the mold, returns to the set value. If the mold temperature is lower than the set value, the controller will turn on the heater. : >Solve defects (such as trachoma, water marks), reduce defective products, and improve production efficiency. Low temperature category, degree, medium temperature category, ultra-high temperature category (water circulation control machine)
: >, degree ( Oil circulation control machine), with various models, temperature levels, heating power, and pump size, customized temperature control equipment according to actual process requirements.
The difference between oil temperature controller and water temperature controller:
Because the specific heat of water is greater than that of oil, when the controlled temperature is the same, the medium heat conduction effect of water temperature controller is better than that of oil temperature controller. many. At the same time, the water temperature machine uses water as the medium and only needs to be connected to tap water. It is easy to use and pollution-free.
Since the actual temperature control temperature of the water temperature machine can only be less than or equal to ℃, when the actual temperature control temperature exceeds ℃, the temperature control experts of Shenzhen Aode Machinery recommend that you use an ultra-high temperature oil temperature machine because of its temperature control The temperature is as high as ℃
:>According to the different heat transfer media, it is divided into two types: water temperature controller and oil temperature controller. Compared with water-type mold temperature controllers, this type of mold temperature controller is free to buy. Oil-type mold temperature controllers can be used at lower temperatures. Heating the thermal oil temperature to degrees Celsius under operating pressure. All electrical components are made of the famous French brand Schneider series products, with low failure rate and durability
: ><:><:>
< r#: >Touch operation, comfortable user experience, stainless steel one-piece molding The piping system has the characteristics of uniform heat conduction, fast heat transfer speed, large pump flow rate and high pressure. For more features, please view
< r# < r# Circulating pump oil temperature machine, circulating pump water temperature machine, circulating pump temperature control equipment